14
OPERATING
Preparation for spray
extraction ( Wash vacuum
cleaning)
Before extraction cleaning of carpeted floors or upholstery
check the color-fastness of the material. To do this apply
some of the concentrated cleaning agent to an in conspicu-
ous area with a cloth allow it to dry, then carry out a color
comparison. The floor covering or upholstery should only be
cleaned if no change of color is evident.
A- Tank - Release the canister clamps, remove the hood,
cartridge filter and paper filter if fitted. To remove the filter
turn the filter retaining clip anti clockwise and pull off the fil-
ter cartridge including the base plate.
B- Foam Plastic Filter - Install the foam plastic filter by pus-
hing the filter completely onto the float valve retainer as far
as it will go. Now reinstall the hood on the canister, fasten
the canister clamps and install the extraction cleaning
accessories.
C- Pressure Hose
D- Insert the pressure hose in to the corresponding aperture
of the adapter supplied and secure to the suction hose
or suction tube at regular intervals. Insert the quick release
coupling at the end of the hose into the mating socket in to
the hood and push it home so that it locks. The pressure
hose connection can be straightforwardly released. To do
this push the corrugated sleeve of the quick release coup-
ling back so that the coupling is automatically forced out
under spring pressure.
E- Spray Extraction Liquid Tank Connection Hose - Push
the plug connector on the connection hose in to the corre-
sponding aperture in the hood as far as it will go. Take care
to ensure that the hose is not kinked and that the end of the
hose with the strainer is positioned at the bottom of the tank.
Spray extraction liquid. Remove the screw plug from the
tank and pour in the mixture of water and concentrated
cleaning agent with the aid of the funnel. The capacity of the
tank is 4.5 liters.
CAUTION!!! Use only non-polluting, environmentfriendly
cleaning agents. Please observe the mixture ratio specified
by the manufacturer.
F- Accessories - Insert the floor nozzle (or the sofa nozzle)
on the extension tubes. Connect the sprayer tube to the pin
of the extension tubes (push and turn anti-clockwise).
en
