17
OPERATING
H- Now proceed as following:
• Set the control switch to maximum
suction power.
• Switch t on the appliance by light
pressure on the ON/OFF switch.
• Start the pump by applying light
pressure to the switch.
I- Place the upholstery cleaning nozzle
lightly on the upholstery, pull the button
of handle, moving the nozzle slowly
backwards at the same time. In this way
the cleaning solution is sprayed under
pressure onto the dirty area and is
immediately sucked up again together with the dirt. The
entire area is covered by cleaning adjacent strips.
J- Float Valve - When the liquid in the
tank reaches the maximum level, the float
valve will automatically close the intake
aperture in the hood, interrupting the
intake process. Switch the appliance off
immediately and withdraw the mains
plug. Now carry or pull the complete
appliance to the disposal point, remove
the connection hose from the spray
extraction liquid tank and the pressure
hose from the hood, then empty the
canister. To empty the liquid from the tank, turn off the
motor switch and open the water discharge. Before
switching it on again verify the water discharge is closed.
If, temporarily no spray extraction liquid is
needed; switch off the pump.
NOTICE!
ATTENTION!
When the machine is working, never
open the water discharge.
en
