12
OPERATING
1. Attach the required nozzle.
2. Pull out the power supply cable by tugging on the
plug until the required length is reached.
A yellow mark on the cable shows you that the maximum
cable length has almost been reached. The maximum
cable length is shown by a red mark on the cable. Never
pull the cable out of the appliance beyond the red mark.
3. To switch the vacuum cleaner on, the ON-OFF pedal but-
ton “ [B] “
4. Set the required suction level using the suction power
regulator “ [A] “
MIN. = push to the left
MAX. = push to the right
Adjustment of suction level
by means of the suction control on the handle of the
suction hose:
Suction level max. = vent closed
Suction level min. = vent open
WARNING!
Always check the appliance and the power cable before use.
Faulty appliances may cause injury and should not be used.
In case of full dust bag, as well as with clogged up accesso-
ries (hose, tube, nozzles), the filter exchange indicator
lights[D] up. In order to make an accurate evaluation, press
press the switch on the maximum vacuum power position
and lift the floor suction nozzle from the floor. In this case, re-
place the dust bag and/or the clogged filters or remove the
stoppage.
NOTICE! Dust bag
Vacuum cleaning
GB
min max
B A
D
min max
