15
The motor protection filter is located behind the dust bag
in the dust chamber.
1. Press the release key (2), open the dust chamber lid and
remove the dust bag (see “Changing the dust bag”).
2. Pull the motor protection filter cartridge up from the rail to
remove the motor protection filter.
3. Remove the motor protection filter and put a new motor
protection filter in the cassette.
4. Set the motor protection filter cartridge into the guide rail.
5. Reinsert the dust bag and close the dust chamber lid. (see
“changing the dust bag”).
The HEPA-filter is located under the exhaust air grid.
1. Release the exhaust air grid by pushing it upwards.
2. Remove the old HEPA-filter and replace it by a new one.
3. Reinsert the exhaust air grid until it clicks into place.
The HEPA* filter is a high efficiency submicron air filter
which not only collects household dust but also pollen
and other micro-small particles – a boon for people with
sensitive respiratory organs or those suffering from all-
ergies.
* HEPA = H
IGH EFFICIENCY PARTICULATE AIR FILTER
ATTENTION! *Cut to size motor protection filter
If the motor protection filter contained in the package of re-
placement dust bags is too big, cut it precisely to the di-
mension required for your vacuum cleaner. Make sure that
the motor protection filter fits perfectly the opening of the va-
cuum motor and does not allow any dust to get in.
CLEANING AND MAINTENANCE
Changing the *motor
protection filter
Changing the HEPA-filter
Change cycle, HEPA-filter – after approx. 6 months.
NOTE!
2
Change cycle, motor protection filter - after the consump-
tion of approx. 5 dust bags.
NOTE!
en
