Bedienungsanleitung Falcon 900 deluxe inox (Seite 28 von 32) (Englisch)

326872

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

b) Proceed to the next hook and release it in a similar

way, and so on. Use force if the hooks are stiff, as

the old seal will be discarded.

c) When fitting new seal, position the seal join at the

bottom. Hook the new seal in one of the corner holes

of the door, and proceed round the door snapping in

each hook in turn.

18 To Adjust the Oven Door Catch Keeper

a) Open the oven door and slacken the locknut at the

keeper base.

b) Adjust the keeper inward or outward as required,

until the desired door operation is obtained.

c) Re-tighten the locknut.

19 To Remove the Hotplate Spark Generator

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

appliance rear. Remove the fixings that secure the

cover and lift it clear.

b) Undo the terminal connections noting their positions.

c) Undo the fixings that secure the spark generator and

remove the device.

20 To Remove the Hotplate Electrode Leads

Disconnect from the electricity supply.

Pull the unit forward to access the rear of the

appliance.

a) Remove the pan supports, hotplate accessories and

burner heads.

b) Remove the hotplate as detailed in Section 1.

c) Remove the cover box and disconnect all HT leads

at the generator.

d) Remove the lower back panel and disconnect the

lead at the electrode.

e) Pull the sleeved bundle of HT leads up through the

rear upright.

f) Pull the appropriate lead from the sleeve and push in

the replacement.

g) Replace the leads in the rear upright.

h) Re-connect the leads at the generator and oven

electrode.

j) Re-assemble in reverse order and check ignition.

21 To Remove Oven Inner Back

a) Open the oven door. For the LH oven unscrew the 2

thermostat phial fixing screws. Remove the fixings

that secure the inner back to the oven rear.

b) Lift the removable panel away.

c) Re-assemble in reverse order. Ensure that the

retaining fixings are fully tightened.

22 To Replace an Oven Fan

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

rear of the appliance. Remove the fixings that secure

the cover and lift it clear.

b) Remove the fan wiring, noting the connection

positions.

c) Remove the inner back as detailed in Section 21.

d) Hold the fan blades and undo the centre nut (LH

thread), brass washers, fan blade and circlip.

e) Undo the fixings that retain the fan and remove it

from the cavity rear.

f) Fit the replacement and re-assemble parts in reverse

order. Check that the oven operates satisfactorily.

23 To Remove an Oven fan Element

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

rear of the appliance. Remove the fixings that secure

the cover and lift it clear.

b) Undo the terminal connections noting their positions.

c) Remove the inner back as detailed in Section 21.

d) Remove the fixings that secure the element within

the oven and lift the element away carefully.

e) Fit the replacement element and re-assemble parts

in reverse order.

f) Check that the oven operates correctly.

24 To Remove the LH Oven Bottom and Top

Elements

Disconnect the appliance from the electricity supply.

Bottom Element

a) Pull the unit forward to access the cover boxes at the

rear of the unit. Remove the fixings that secure the

cover and lift it clear.

b) Undo the terminal connections, noting their positions.

c) Remove the fixings that secure the bottom element

cover.

d) Undo the terminal connections, noting their positions.

e) Remove the lower element support fixings.

f) Remove the element bracket fixings and withdraw

element.

g) Replace the element and re-assemble parts in

reverse order.

Top Element

a) Open the LH oven door and undo the fixings that

secure the heat shield.

b) Remove the top element bracket fixings and

withdraw element.

c) Replace the element and re-assemble parts in

reverse order. Check that the oven operates

satisfactorily.

25 To Remove a Grill Element

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to access the cover boxes at the

rear of the appliance. Remove the fixings that secure

the cover and lift it clear.

b) Undo the terminal connections, noting their positions.

c) Remove the grill pan.

d) Remove the fixings that secure the element front

support from within the chamber.

e) Remove a fixing from each of the elements and

withdraw the elements from the chamber.

f) Fit the replacement element(s) and re-assemble

parts in reverse order. Check operation of the grill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon 900 deluxe inox Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon 900 deluxe inox

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info