Bedienungsanleitung Falcon Classic Deluxe 110 (Seite 46 von 60) (Deutsch, Englisch)

69964

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

If there is an installation problem and I don’t get my

original installer to come back to fix it who pays?

You do. Service organisations will charge for their call-outs if

they are correcting work carried out by your original installer.

It’s in your interest to track down your original installer.

Current Operated Earth Leakage Breakers

Where the cooker installation is protected by a 30 milliamp

sensitivity residual current device (RCD), the combined use of

your cooker and other domestic appliances may occasionally

cause nuisance tripping. In these instances the cooker circuit

may need to be protected by ﬁ tting 100mA device. This work

should be carried out by a qualiﬁ ed electrician.

Power failure

In the event of a failure in the electrical supply the hotplate may

be lit using a match.

Food is cooking too slowly, too quickly, or burning

Cooking times may diﬀ er from your previous oven. Check

that you are using the recommended temperatures and shelf

positions. See the oven cooking guide. The oven control

settings and cooking times are intended to be used only as

a guide. Individual tastes may require the temperature to be

altered either way, to get the results you want. Try cooking at a

higher temperature setting.

The oven is not cooking evenly

Do not use a tin or baking tray larger than 340mm x 340mm.

If you are cooking a large item, be prepared to turn it round

during cooking.

If two shelves are used, check that space has been left for the

heat to cir cu late. When a baking tray is put into the oven, make

sure it is placed centrally on the shelf.

Check that the door seal is not damaged and that the door

catch is adjusted so that the door is held ﬁ rmly against the seal.

A dish of water when placed on the shelf should be the same

depth all over. (For example, if it is deeper at the back, then the

back of the cooker should be raised up or the front lowered).

If the cooker is not level arrange for your supplier to level it for

you.

The left hand Multifunction oven not coming on when

turned on manually

Is the power on? Is the clock illuminated?

If not there may be something wrong with the power supply. Is

the cooker supply on at the isolator switch?

Has the time of day been set?

Have you set a cooking function?

Is the key symbol (

) showing in the display? See the Clock

section of the instructions for more information on the key lock

feature of the clock.

The left hand Multifunction oven not coming on when

automatic cooking

Timer set correctly but oven knob left OFF by mistake?

Is the key symbol (

) showing in the display? See the Clock

section of the instructions for more information on the key lock

feature of the clock.

Have you set a cooking function?

Oven temperature getting hotter as the cooker gets

older

If turning the knob down has not worked or only worked for a

short time then you may need a new thermostat. This should

be ﬁ tted by a service person.

The oven light is not working

The bulb has probably blown. You can buy a replacement

bulb (which is not covered under the guarantee) from a good

electrical shop.

Ask for an Edison screw ﬁ tting 15w 240v

lamp, FOR OVENS. It must be a special

bulb, heat resistant to 300 °C. See the HELP

leaﬂ et for spares by mail order.

Turn oﬀ the power supply.

Make sure the oven is cool. Open the oven door and remove

the oven shelves.

Unscrew the bulb cover by turning anticlockwise. It may be

very stiﬀ .

Taking care to protect your ﬁ ngers in case the bulb should

shatter, unscrew the old bulb.

Screw in the new bulb, screw back the bulb cover. Turn on the

electricity supply and check that the bulb now lights.

Hotplate ignition or hotplate burners faulty

Is the power on? Is the clock illuminated? If not there maybe

something wrong with the power supply.

See ‘power supply’ section further on.

Are the sparker (ignition electrode) or burner slots blocked by

debris?

Is the burner trim correctly located?

Are the burner caps correctly located?

See the section entitled ‘Cleaning’

Hotplate burners will not light

Make sure that the burner parts have been replaced correctly

after wiping or removing for cleaning.

Check that there is not a problem with your gas supply. You

can do this by making sure that other gas appliances you may

have are working.

Do the burners spark when you push the button? If not check

the power is on - is the clock illuminated?

General Safety Instructions

This appliance must be installed by a competent person in

accordance with the installation instructions. The installation

must comply with the relevant regulations and also the local

electricity supply company requirements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon Classic Deluxe 110 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon Classic Deluxe 110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info