Bedienungsanleitung Falcon De Luxe 1000DF (Seite 20 von 56) (Englisch, Französisch)

500343

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Servicing

When servicing or replacing gas carrying components,

disconnect from the gas supply before commencing

operation.

Check the appliance is gas sound after completion of

service. When checking for gas leaks do not use washing

up liquid - this can corrode. Use a product speciﬁ cally

manufactured for leak detection.

CAUTION: DO NOT USE A FLAME TO CHECK FOR

GAS LEAKS.

Do not use re-conditioned or unauthorised gas controls.

Disconnect from the electricity supply before commencing

servicing, particularly before removing any of the following:

- control panel, side panels, hotplate tray or any electrical

components or covers.

Before electrical re-connection, check that the appliance is

electrically safe.

Note - References to left handand right hand oven apply as

viewed from the front.

BEFORE SERVICING ANY GAS CARRYING

COMPONENTS. TURN OFF THE GAS SUPPLY.

1 To Remove the Hotplate

Disconnect the appliance from the electricity supply. Pull

the unit forward to gain access.

a) Remove the pan supports/hotplate accessories and

burner caps.

b) Remove the brass venturi in the centre of each

hotplate burner bezel.

c) Remove the bezel from the hotplate and disconnect

the spark ignition lead from the spark electrode.

d) Lift the hotplate at the front and disconnect the

hotplate earth lead. Lift the hotplate clear of the

appliance.

e) Replace in reverse order.

2 To Remove the Control Panel

Disconnect the appliance from the electricity supply.

a) Remove the pan supports/hotplate accessories and

burner caps.

b) Slacken the brass venturi at the centre of each burner.

c) Remove the control knobs from all taps.

d) Open the grill and right hand oven doors. Remove 3

ﬁ xings on the top front and 3 ﬁ xings on the control

panel underside.

e) Pull the control panel forward. Remove the

connections from the rear of the three neons.

Disconnect the earth lead and lift the panel clear of

the unit.

f) Replace all parts in reverse order.

g) When replacing any electrical connections refer to the

wiring diagram.

3 To Remove an Outer Side Panel

Disconnect the appliance from the electricity supply.

a) Remove the 3 screws from the side at the front edge

and the 3 screws at the rear of the cooker.

b) Remove the panel by pulling it away from the unit.

c) Replace parts in reverse order.

4 To Remove an Oven or Grill Neon

Disconnect the appliance from the electricity supply.

a) Remove the control panel as detailed in Section 2

b) Remove the relevant neon connection and undo the

nut which secures the neon to the control panel.

c) Replace parts in reverse order. Ensure the

replacement neon functions correctly.

5 To Remove a Thermostat

Disconnect the appliance from the electricity supply.

a) Remove the hotplate as detailed in Section 1.

b) Remove the control panel as detailed in Section 2

c) Open the appropriate oven door and remove the oven

shelves.

d) Remove the screws holding the thermostat phial to

the top right hand side of the oven.

e) Pull the unit forward to gain access rear of the cooker.

Remove the screws holding the back panel.

f) Remove thermostat phial and capillary through back

of cooker, note correct capillary route.

g) Disconnect the thermostat wiring. Undo the ﬁ xings

that secure the device to the mounting plate.

e) Fit the replacement and re-assemble in reverse order.

Ensure that the phial is clipped to the oven side,

positioned centrally between the clips. Check that the

thermostat functions correctly

6 To Replace a Grill Controller

Disconnect the appliance from the electricity supply.

a) Remove the hotplate as detailed in Section 1.

b) Remove the control panel as detailed in Section 2.

c) Disconnect the controller wiring. Undo the ﬁ xings that

secure the device to the mounting plate.

d) Fit the replacement and re-assemble parts in reverse

order. Check that the replacement functions correctly.

7 To Remove an Oven Cut-Off Thermostat

Disconnect the appliance from the electricity supply.

a) Pull the unit forward to gain access to the cover box.

Undo the cover screws and lift clear.

b) The control is located on the earth plate beside the

oven element connections.

c) Disconnect the thermostat wiring. Undo the ﬁ xings

that secure the thermostat to the earth plate and

remove.

d) Fit replacement control and re-assemble parts in

reverse order.

8 To Remove a Hotplate Tap

a) Remove the hotplate as detailed in Section 1.

b) Remove the control panel as detailed in Section 2.

c) Unplug the FSD lead from the rear of the tap. Undo

compression ﬁ tting at the rear of the tap. Remove the

ﬁ xings that secure the tap to the gas rail. Disconnect

the ignition switch wiring.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon De Luxe 1000DF Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info