Bedienungsanleitung Falcon De Luxe 1092 Continental (Seite 9 von 56) (Deutsch, Englisch)

500340

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

Cleaning your cooker

Before thorough cleaning, isolate from the

electricity supply. Remember to switch on the

electricity supply before use.

Never use paint solvents, washing soda, caustic

cleaners, biological powders, bleach, chlorine

based bleach cleaners, coarse abrasives or salt.

Don’t mix diﬀ erent cleaning products - they may

react together with hazardous results. Do not

use a steam cleaner on your cooker

If you want to move your cooker for cleaning, see

the section called ‘Moving your cooker’.

All parts of the cooker can be cleaned with hot

soapy water - but take care that no surplus water

seeps into the appliance.

Stainless Steel Hob

Lift away pots or pans from hob. Remove pan

supports from spillage area and carefully place in a

sink of warm soapy water. Wipe loose debris from

hob.

Avoid using any abrasive cleaners including

cream cleaners, e.g. Cif, on brushed Stainless Steel

surfaces. For best results use a liquid detergent e.g.

Domestos Multi Surface Cleaner.

Rinse with cold water and thoroughly dry with a

clean, soft cloth. Ensure all parts are dry before

repositioning.

Hotplate burners

The large aluminium alloy rings around the burners

will require regular cleaning to maintain a good

condition, preferably after each use and whilst they

are still warm.

Should these rings become marked please use the

following cleaning method:

1. Remove food deposits gently using a soft damp

cloth and Astonish or Cif Cream Cleaner

2. Rinse with a clean soft cloth and dry.

Be careful not to disturb the ignition electrode or

hotplate burner safety device probe.

The burner heads and caps can be removed for

cleaning. Make sure they are absolutely dry before

replacing.

Burner head

Burner Base

When ﬁ tting burner head, ensure this locates

properly within the base.

base of cook top burner bottom of burner head

Check burner ports are not blocked. If blockage

occurs, remove stubborn particles using a piece of

fuse wire.

Control Panel and Oven Doors

For best results liquid detergents should be used.

The control panel and control knobs should only

be cleaned with a soft cloth wrung out in clean

hot soapy water - but take care that no surplus

water seeps into the appliance. Wipe with a clean

dampened cloth then polish with a dry cloth. The

oven doors should only be cleaned with a soft cloth

wrung out in clean hot soapy water.

Cleaning Brass Components

Uncoated natural brass is used as part of the

authentic ﬁ nish and may tarnish with age.

To regain a polished ﬁ nish, these areas should be

cleaned using a proprietary cleaner such as Brasso.

Stubborn marks on the aluminium burner rings can

be removed using a similar cleaning material. This

will also restore the polished ﬁ nish.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon De Luxe 1092 Continental Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon De Luxe 1092 Continental

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info