Bedienungsanleitung Falcon Excel 110 (Seite 46 von 60) (Deutsch, Englisch)

71518

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

The side panels of either oven can be removed.

Each side of the oven is ﬁ xed with four ﬁ xing screws. You don’t

have to remove the screws to remove the oven linings. Lift each

side panel upwards and they will slide oﬀ the screws. Then pull

them forwards.

Once the linings are removed, the oven enamel interior can be

cleaned.

Troubleshooting

Steam is coming from the oven

When cooking foods with a high water content (e.g. oven chips)

there may be some steam visible at the rear grille. Take care when

opening the oven door, as there may be a momentary puﬀ of

steam when the oven door is opened. Stand well back and allow

any steam to disperse.

The oven fan is noisy

The note of the oven fan may change as the oven heats up - this

is perfectly normal.

What cleaning materials are recommended for the

cooker?

See the ‘Cleaning’ section for recommended cleaning materials.

We do not recommend Mr. Muscle, as it contains chemicals that

may damage the surfaces of your cooker.

Grill not cooking properly

Are you using the pan and trivet supplied with the cooker?

Is the pan being used on the runners, not the ﬂ oor of the

compartment? Is the grill pan pushed fully back to stop?

When you pull the grill pan forward is the wide rim at the front?

It's important that the wider part is at the front.

The knobs get hot when I use the oven or the grill,

can I avoid this?

Yes, this is caused by heat rising from the oven or the grill, and

heating them up. Don’t leave the oven door open. Make sure that

the grill pan is pushed right back to the ‘back stop’ when grilling.

If there is an installation problem and I don’t get my

original installer to come back to fix it who pays?

You do. Service organisations will charge for their call-outs if they

are correcting work carried out by your original installer. It’s in

your interest to track down your original installer.

Current Operated Earth Leakage Breakers

Where the cooker installation is protected by a 30 milliamp

sensitivity residual current device (RCD), the combined use of

your cooker and other domestic appliances may occasionally

cause nuisance tripping. In these instances the cooker circuit may

need to be protected by ﬁ tting 100mA device. This work should

be carried out by a qualiﬁ ed electrician.

Power failure

In the event of a failure in the electrical supply the hotplate may

be lit using a match.

Food is cooking too slowly, too quickly, or burning

Cooking times may diﬀ er from your previous oven. Check

that you are using the recommended temperatures and shelf

positions. See the oven cooking guide. The oven control settings

and cooking times are intended to be used only as a guide.

Individual tastes may require the temperature to be altered

either way, to get the results you want. Try cooking at a higher

temperature setting.

The oven is not cooking evenly

Do not use a tin or baking tray larger than 340mm x 340mm.

If you are cooking a large item, be prepared to turn it round

during cooking.

If two shelves are used, check that space has been left for the

heat to cir cu late. When a baking tray is put into the oven, make

sure it is placed centrally on the shelf.

Check that the door seal is not damaged and that the door catch

is adjusted so that the door is held ﬁ rmly against the seal.

A dish of water when placed on the shelf should be the same

depth all over. (For example, if it is deeper at the back, then the

back of the cooker should be raised up or the front lowered). If

the cooker is not level arrange for your supplier to level it for you.

The left hand Multifunction oven not coming on

when turned on manually

Is the power on? Is the clock illuminated?

If not there may be something wrong with the power supply. Is

the cooker supply on at the isolator switch?

Has the time of day been set?

Have you set a cooking function?

Is the key symbol (

) showing in the display? See the Clock

section of the instructions for more information on the key lock

feature of the clock.

The left hand Multifunction oven not coming on

when automatic cooking

Timer set correctly but oven knob left OFF by mistake?

Is the key symbol (

) showing in the display? See the Clock

section of the instructions for more information on the key lock

feature of the clock.

Have you set a cooking function?

Oven temperature getting hotter as the cooker gets

older

If turning the knob down has not worked or only worked for a

short time then you may need a new thermostat. This should be

ﬁ tted by a service person.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon Excel 110 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falcon Excel 110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info