Bedienungsanleitung Falcon Toledo 90 (Seite 11 von 40) (Englisch)

659394

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

The Clock

You can use the timer (Fig.2-20) to turn the ovens on and o.

The clock must be set to the time of day before the ovens will

work.

Setting the Time of Day

When the clock is rst connected the display ashes ( 0.00 )

and (



) alternately.

Press and hold both the [] and [] buttons down

(Fig.2-21). Now press the [+] button (or the [–] button) until

the correct time shows.

Do not forget that it is a 24-hour clock.

If you need to reset the cooker, turn o the power supply and

wait for a couple of minutes and start again.

Minute Minder

Press and hold the [] button (Fig.2-22), and then press the

[+] button until the length of time you want to cook for is

shown (Fig.2-23).

You can check the time remaining by pressing []. When the

beeper sounds cancel it by pressing [].

• The ‘cook period’, which is the length of time you

want the oven to cook for.

• The ‘stop time’, which is the time of day you want the

oven to stop cooking.

To Stop the Ovens Automatically

Press and hold the ‘stop time’ [] button (Fig.2-24) and then

press the [+] button (or [–] button) until the required ‘stop

time’ shows (Fig.2-25). AUTO will show in the display.

Once the ‘stop time’ is reached, the beeper sounds. To stop the

beep turn the oven control knob to 0 rst and then press [



]

once; press [



] again to return to manual cooking.

To Start and Stop the Ovens Automatically

Before you set the clock you must have two numbers clearly

in mind – the ‘cook period’ and the ‘stop time’.

Note: You cannot set a start time directly – this is set

automatically by setting the ‘cook period’ and the ‘stop time’.

Press and hold the [] button (Fig.2-26) and then press the

[+] button (or [–] button) until the required ‘cook period’ shows

(Fig.2-27).

Now press and hold the [] button (Fig.2-28) and then press

the [+] button (or [–] button) until the required ‘stop time’

shows (Fig.2-29). Release the buttons.

AUTO will now show in the display.

Set the oven to the required temperature. When cooking is

nished the beeper will sound. Turn the oven knob to the OFF

position rst, and then press the [] button once to stop the

beep; press it again to return to manual cooking.

If you are out, do not worry about the beeper going o, it

stops after a while. When you return, turn the oven knob to 0

rst, and then press [] twice to return to manual cooking.

ArtNo.302-0001 - 6-button clock

ArtNo.302-0003 - 6BC

minute minder setting 1

ArtNo.302-0004 -

Minute minder setting 2

ArtNo.302-0005 -

6BC Stopping the oven 1

ArtNo.302-0002 - 6BC annotated

A B C D E F

ArtNo.302-0005a -

6BC Stopping the oven 1a

ArtNo.302-0006 - 6BC

setting the cook time

ArtNo.302-0006 - 6BC

setting the cook time

ArtNo.302-0005 -

6BC Stopping the oven 1

ArtNo.302-0005a -

6BC Stopping the oven 1a

A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time, D – Manual,

E & F – Time setting buttons

Fig.2-20

Fig.2-21

Fig.2-26 Fig.2-27

Fig.2-28 Fig.2-29

Fig.2-22 Fig.2-23

Fig.2-24 Fig.2-25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falcon Toledo 90 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info