Bedienungsanleitung Falmec Adara (Seite 12 von 70) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

661991

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Maximum operating distance: 5 metres. The maximum operating distance could be less than 5 metres in case of electromagnetic

interference by other equipment.

Light pushbutton on remote control: light on/off.

– and + pushbutton: increase/decrease speed (to start the motor press either the + or the – pushbutton).

Timer pushbutton: see instructions below.

Timer and ‘filter clogged’ alarm pushbutton

• This function allows the automatic turning off of the hood after running for 15 minutes at the speed previously set (the pushbutton

shows a flickering light).

• After about 30 hours of running the pushbutton indicates the need for washing the metal filters (the pushbutton shows a solid red

light). To disable the alarm press the pushbutton for a few seconds until the red light turns off. Then turn the hood off and on again

to check that the alarm has disappeared.

3. ELECTRONIC CONTROL PANEL

1: Timer/Alarm filters

The steady RED light indicates that the fat filter alarm is activated (after 30 hours), to deactivate this alarm and zero the meters,

maintain the Key pressed for 3 seconds.

Flashing RED light indicates that the timer function is activated. This function can only be activated if the motor is activated and run-

ning at any velocity when the Key is pressed (either prolonged or not). This function will cause the automatic switch-off of the hood

after 15 minutes.

With the Timer function activated, the hood can be switched-off by the operator in any case and the function will be deactivated.

The Timer function remains associated to a velocity. A change in the velocity, with the Timer function activated, will deactivate it.

2: 1st Velocity

When the LED is switched-off, non-prolonged pressing of the key will switch-on the hood at the 1

velocity and illuminate the respec-

tive LED. The function will switch-on when the Key is released.

When the LED is switched-off and another velocity is activated, pressing the Key will imply selection of the 1

velocity, switching-on

of the respective LED and switching-off of the LED associated with the velocity that was previously selected.

When the LED is on, pressing the Key will imply the switching-off the LED and MOTOR.

When the LED is switched-off, prolonged pressing (at least 3 seconds) of the Key will cause activation of the recirculation function.

During the recirculation function (with a duration of 24 hours), the LED will flash. From the activation of this function, the hood will

remain switched-on for one hour at the 1

velocity, after which it will switch-off for 3 hours and then reactivate for another hour.

These cycles are repeated until the timeout.

With this function activated, the other functions cannot be selected. To remove this function, keep Key 2 pressed for at least 3 sec-

onds.

3: 2nd Velocity

When the LED is switched-off and another velocity activated, pressing the Key (either prolonged or not) will imply the selection of

the 2

velocity, switching-on of the respective LED and switching-off of the LED associated with the velocity that was previously

selected.

When the LED is switched-off and no velocity activated, pressing the Key will have no effect.

When the LED is switched-on, pressing the Key 3 will have no effect.

To switch the hood off, it will be necessary to firstly select the 1

velocity and then repress the same Key.

4: 3rd Velocity

When the LED is switched-off and another velocity activated, pressing the Key (either prolonged or not) implies the selection of

the 3

velocity, the switching-on of the respective LED and switching-off of the LED associated to the velocity that was previously

selected.

When the LED is switched-off and no velocity activated, pressing the Key will have no effect.

When the LED is switched-on, pressing the Key 4 will have no effect.

To switch the hood off, it will be necessary to firstly select the 1

velocity and then repress the same Key.

5: 4th Velocity

When the LED is switched-off and another velocity activated, pressing the Key (either prolonged or not) implies the selection of the

velocity, switching-on of the respective LED and switching-off of the LED associated to the velocity that was previously selected.

When the LED is switched-off and no velocity activated, pressing the Key will have no effect.

When the LED is switched-on, pressing the key 5 will have no effect.

The forth velocity must remain on for a maximum of 14 minutes, after which, one must return to the third.

To switch the hood off, it will be necessary to firstly select the 1

velocity and then repress the same key.

6: Light - Remote Binding

Light: Briefly pressing key T6 will turn the light on and off. The T6 key will light up if the light is on.

Remote Binding (optional): With motor and light turned off, applying prolonged pressure on the T6 key will activate remote binding

mode. The T6 Key will flash for a maximum of 10 seconds. During flashing, at least one radio control key must be pressed. The func-

tion will deactivate upon completion of the 10 seconds, or earlier if a compatible remote control is detected.

Key pressure management:

Prolonged pressure = finger pressed on key for at least 3 seconds, the function activates during pressure.

Non-prolonged pressure = finger pressed on key for less than 3 seconds, the function activates upon its release.

Radio control (optional): Place the device far from sources of electromagnetic waves which could interfere with the range hood’s

electronic functions

Maximum operating distance 4 metres. This distance may vary in defect based on electromagnetic interference of other devices.

Falmec Adara Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info