Bedienungsanleitung Falmec Exploit Top - wall (Seite 14 von 76) (Alle Sprachen)

709787

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

SAFETY INSTRUCTIONS AND WARNINGS

INSTALLATION WARNINGS

TECHNICAL SAFETY

Installation operations are to be carried out by skilled and qualied installers in accordance with the instructions in this booklet

and in compliance with the regulations in force.

• Before installing the hood, check the integrity and function of each part. Should anomalies be noted, do not proceed with installation

and contact the Dealer.

• Do NOT install the hood if an aesthetic defect has been detected. Put it back into its original package and contact the dealer. No claim

can be made for aesthetic defects once the hood has been installed.

• During installation, always use personal protective equipment (e.g. accident-prevention shoes) and adopt prudent and proper conduct.

• The xing kit (screws, plugs, and brackets) supplied with the hood can only be used on masonry walls: should it be necessary to install

the hood onto walls in a dierent material, assess other xing systems keeping the wall resistance and weight of the hood in mind (indicated on

page 2).

• Keep in mind that installations with dierent types of xing systems from those supplied, or which are not compliant, can cause electrical and

mechanical seal danger.

• Do not modify the electrical, mechanical and functional structure of the equipment.

• Do the install the hood outdoors and do not expose it to atmospheric agents (rain, wind, etc.).

ELECTRICAL SAFETY

The electrical system to which the hood is to be connected must be according to standard and compulsorily supplied with

earthed connection in compliance with safety regulations in the country of use. It must also comply with European standards

regarding radio antistatic properties.

• Before installing the hood, check that the electrical mains power supply corresponds with what is reported on the identication plate located

inside the hood.

• The socket used to connect the installed equipment to the electrical power supply must be within reach: if this is not possible, install a mains

switch in an accessible position in order to disconnect the hood when required.

• Any changes to the electrical system required to install the hood must be carried out by a qualied electrician.

• The maximum length of the ue xing screws (supplied by the manufacturer) must be 10 mm. Use of non-compliant screws with these instruc-

tions can lead to danger of an electrical nature.

• It is dangerous to change, or try to change, the features of this equipment. Do not try to solve the problem yourself in the event of equipment

malfunction, but contact the Dealer or an authorised Servicing Department for repairs.

• When installing the hood, disconnect the equipment by removing the plug or switching o the main switch.

FUMES DISCHARGE SAFETY

• Do not connect the equipment to discharge pipes of fumes produced from combustion (for example boilers, replaces, etc.)

• Before installing the hood, ensure that all standards in force regarding discharge of air out of the room have been complied with.

USER WARNINGS

GENERAL WARNINGS

These warnings have been drawn up for your personal safety and those of others. You are therefore kindly asked to read the

booklet carefully in its entirety before installing and using the equipment or carrying out cleaning operations.

• The Manufacturer declines all responsibility for any damage caused directly, or indirectly, to persons, things and pets as a conse-

quence of failing to comply with the safety warnings indicated in this booklet.

• It is imperative that this instructions booklet is kept together with the equipment for any future consultation. If the equipment is sold

or transferred to another person, make sure that the booklet is also supplied so that the new user can be made aware of the hood's

operation and relative warnings.

• Installation operations are to be carried out by a skilled and qualied installer in accordance with the instructions in this booklet and

in compliance with the regulations in force.

• DO NOT use the hood if the power supply cable or other components are damaged. Disconnect the hood from the electrical power supply

and contact the Dealer or an authorised Servicing Department for repairs. Insist on original spare parts. Do not personally try to carry out re-

pairs or replacements. Interventions carried out by incompetent and unauthorised persons can cause damage, even serious, to things

and/or persons not covered by the Manufacturer's warranty.

• Do not modify the electrical, mechanical and functional structure of the equipment. Any changes to the electrical system required to install the

hood must be carried out by a qualied electrician.

INTENDED USE

• The equipment is solely intended to be used to extract fumes generated from cooking food in non-professional domestic kitchens: any

other use is improper, can cause damage to persons, things and pets and exempts the Manufacturer from any liability.

• The equipment can be used by children above the age of 8 and by persons with reduced physical, sensory and mental abilities, or with no expe-

rience or knowledge, as long as they do so under supervision or after having received relative instructions regarding safe use of the equipment

and understanding of the dangers connected to it. Children are not to play with the equipment. Cleaning and maintenance operations intended

for the user must not be carried out by children without supervision.

USE AND CLEANING WARNINGS

• Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching o the main

switch.

Falmec Exploit Top - wall Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info