Bedienungsanleitung Falmec Quantum (Seite 20 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

698465

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

TIMER FUNCTION AND AUTOMATIC

SHUTDOWN FOR THE COOKER

The timer has two functions:

1 – TIMER;

2 – AUTOMATIC SHUTDOWN of one or more cooking areas.

It is possible to set a duration up to 99 minutes.

Once the time set is over, on the display regarding time 00 is shown and a

sound warning is activated that can be deactivated pushing keys (+) or (-).

TIMER

To set:

1. If o, turn the hob on using the key and touch (+) and (-) at the same time.

2. Set the desired time touching keys (+) and (-).

Timer starts passing.

To modify time repeat the procedure from point 1.

To cancel timer:

1. If o, turn the hob on and touch (+) and (-) at the same time.

(on the Plus version the lamp is on

2. Touch the key ( - ) to bring time to 00.

AUTOMATIC SHUTDOWN

For the automatic shutdown function:

1 - turn on the cooker;

2 - select the cooking area;

3 - select the level;

4 - set the timer as described above.

To set the automatic shutdown for another cooking area, repeat the proce-

dure from point 2.

TIMER and AUTOMATIC SHUTDOWN can be used simultaneously.

WHAT TO DO IN CASE OF COOKERS PROBLEMS

The cooker or cooking areas do not turn on:

• The cooker is not connected to the electric network.

• The protection fuse is released.

• Check if the block is not active.

• Keys are covered with water or grease.

• An object is placed on the keys.

The symbol is displayed

• There is no saucepan on the cooking area.

• The container used is not compatible with cooktops.

• The diameter of the saucepan bottom is too small compared to the

cooking area.

The symbol [E] is displayed:

• Disconnect and connect the cooker.

• Contact the after-sales centre.

One of the area or the entire cooker turns o:

• The safety overheating system is active;

• The cooker or one cooking area remains on for too long;

• one or more keys are covered;

• one of the saucepans is empty and the bottom overheated.

The fan keeps on working after the cooker shutdown:

• This is not a malfunction: the fan keeps on protecting the electronic

power unit of the device.

• The fan stops automatically.

COOKERS ERROR CODES

For supporting a service technician in case of error, the UI displays error co-

des.

In combination with the provided document "error codes Basic 2" which in-

cludes datailed information a complete error matrix description is available.

E.G.O's standard error codes are listed following, customized UI can be die-

rent. In the standard general UI eroors (Er xx) and cooking zone errors (E/x)

dier. In case of cooking zone errors the display of the incorrect cooking zone

blinks alternative "E" and a hexcode "X".

Error

code

Description possible

causes

Remedy

The cooking zone

can be congu-

red if a static "C"

is shown

No error, the

user is in the

service menu.

A suitably pan must

be placed on the

relevant cooking

zone

The cooking will

be congured

if a ashing "C"

is shown. After

a successful

conguration the

relevant display

shows "-". If "-"

is not displayed

check the pos-

sible causes of

the E/5

User is in the

service menu,

no error

Wait for the symbol

"-" or abort the con-

guration activities by

pressing the select

key and the "C" will

not ash anymore.

A ashing "E" on

each cooking

zone indicates

that all congs

will be deleted

User is in service

menu, no error

Manual congura-

tion

Temperature limi-

ts are exceeded

Pt or glass

temperature is

too high

NTC -> electro-

nic temperature

too high

System must cool

down

Unsuitable pot,

e.g. loss of the

magnetic cha-

racteristics becau-

se of temperature

in the bottom

On the module

a pot creates

an improper

operatioing

point which can

destroy devices,

e.g IGBTs.

1. The error is auto-

matically cancelled

after 8 s and the

cooking zone can be

used again. In case

of further upcoming

errors the pot has to

be replaced.

2. The module has

to be changed if the

error comes without

a pot on the cooking

zone.

Uncongured

induction module

(all induction mo-

dule answer to UI,

but any element

is related to the

eected cooking

zone.)

induction

module is not

congured

Delete the hob

conguration and

activate the manual

conguration. Start

the UI service menu

to congure the

induction module if

the listed points are

not successful repla-

ce the module.

No communica-

tion between UI

and induction

module

No power sup-

ply of induction

module.

Bad cabling or

defect

Check power and

LIN connections. If

connection is OK,

replace the module

Main power

disturbance

1. Failure in

main power

frequency

detection

2. Overvoltage

Check main power

voltage and frequen-

cy, if ok replace the

module

Non assignable

failure

Replace module or

User interface

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falmec Quantum Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Falmec Quantum

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info