Bedienungsanleitung Falmec Sirio (Seite 33 von 88) (Alle Sprachen)

709871

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

SAFETY INSTRUCTIONS

AND WARNINGS

Installation operations are to be carried

out by skilled and qualied installers in ac-

cordance with the instructions in this booklet and

in compliance with the regulations in force.

DO NOT use the hood if the power supply cable

or other components are damaged: disconnect

the hood from the electrical power supply and con-

tact the Dealer or an authorised Servicing Dealer for

repairs.

Do not modify the electrical, mechanical or func-

tional structure of the equipment.

Do not personally try to carry out repairs or re-

placements. Interventions carried out by incompe-

tent and unauthorised persons can cause serious

damage to the unit or physical and personal harm,

not covered by the Manufacturer's warranty.

WARNINGS FOR THE INSTALLER

TECHNICAL SAFETY

Before installing the hood, check the in-

tegrity and function of each part. Should

anomalies be noted, do not proceed with instal-

lation and contact the Dealer.

Do NOT install the hood if an aesthetic (or cos-

metic) defect has been detected. Put it back into

its original package and contact the dealer.

No claim can be made for aesthetic (or cosmetic)

defects once it has been installed.

During installation, always use personal protective

equipment (e.g.: Safety shoes) and adopt prudent

and proper conduct.

The installation kit (screws and plugs) supplied with

the hood is only to be used on masonry walls: in case

of installation on walls of a dierent material, assess

other installation options keeping in mind the type

of wall surface and the weight of the hood (indicated

on page 2).

Keep in mind that installations with dierent types of

fastening systems from those supplied, or which are

not compliant, can cause electrical and mechanical

seal danger.

Do not install the hood outdoors and do not expose

it to atmospheric elements (rain, wind, etc.).

ELECTRICAL SAFETY

The electrical system to which the hood is

to be connected must be in accordance

with local standards and supplied with earthed

connection in compliance with safety regulations

in the country of use. It must also comply with Eu-

ropean standards regarding radio antistatic prop-

erties.

Before installing the hood, check that the electrical

mains power supply corresponds with what is report-

ed on the identication plate located inside the hood.

The socket used to connect the installed equipment

to the electrical power supply must be within reach:

otherwise, install a mains switch to disconnect the

hood when required.

Any changes to the electrical system must be carried

out by a qualied electrician.

The maximum length of the ue fastening screws

(supplied by the manufacturer) must be 13 mm. Use

of non-compliant screws with these instructions can

lead to danger of an electrical nature.

Do not try to solve the problem yourself in the event

of equipment malfunction, but contact the Dealer or

an authorised Servicing Department for repairs.

When installing the hood, disconnect

the equipment by removing the plug or

switching o the main switch.

FUMES DISCHARGE SAFETY

Do no connect the equipment to discharge

pipes of fumes produced from combustion

(for example boilers, replaces, etc.).

Before installing the hood, ensure that all standards in

force regarding discharge of air out of the room have

been complied with

USER WARNINGS

These warnings have been drawn up for

your personal safety and those of others.

You are therefore kindly asked to read the book-

let carefully in its entirety before using the or

cleaning the equipment.

The Manufacturer declines all responsibility for

any damage caused directly, or indirectly, to per-

sons, things and pets as a consequence of failing

to comply with the safety warnings indicated in

this booklet.

It is imperative that this instructions booklet is

kept together with the equipment for any future

consultation.

If the equipment is sold or transferred to another per-

son, make sure that the booklet is also supplied so

that the new user can be made aware of the hood's

operation and relative warnings.

After the stainless steel hood has been installed, it

will need to be cleaned to remove any residues re-

maining from the protection adhesive as well as any

grease and oil stains which, if not removed, can cause

irreversible damage to the hood surface. To properly

clean the unit, the manufacturer recommends using

the supplied moist wipes, which are also available

sold separately.

Insist on original spare parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falmec Sirio Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info