Bedienungsanleitung Falmec Sirio (Seite 36 von 88) (Alle Sprachen)

709871

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

RESTORING DEFAULT CODE

the procedure is to be carried out if the hood is disposed of, sold or transferred.

Disconnect the power to the hood before starting the procedure.

• Press UP and DOWN simultaneously on the radio control for more

than 5 seconds: reset is conrmed by three brief ashes of the display.

• Reconnect the hood to the electrical power supply.

• Proceed with associating the hood and the radio control, as described in point

MAINTENANCE

Before cleaning or carrying out maintenance operations, discon-

nect the equipment by removing the plug or switching o the

main switch.

Do not use detergents containing abrasive, acidic or corrosive substances

or abrasive cloths.

Regular maintenance guarantees proper operation and performance over time.

Special attention is to be paid to the metal anti-grease lters : frequent clean-

ing of the lters and their supports ensures that no ammable grease is accu-

mulated.

CLEANING OF EXTERNAL SURFACES

You are advised to clean the external surfaces of the hood at least once every

15 days to prevent oily substances and grease from sticking to them. To clean

the brushed stainless steel hood, the Manufacturer recommends using "Magic

Steel" wipes.

Alternatively

and for all the other types of surfaces, it can be cleaned using a

damp cloth, slightly moistened with mild, liquid detergent or denatured alcohol.

Complete cleaning by rinsing well and drying with soft cloths.

Do not use too much moisture or water around the push button

control panel and lighting devices in order to prevent humidity

from reaching electronic parts.

The glass panels can only be cleaned with specic, non-corrosive or non-abra-

sive detergents using a soft cloth.

The Manufacturer declines all responsibility for failure to comply with these in-

structions.

CLEANING OF INTERNAL SURFACES

Do not clean electrical parts, or parts related to the motor inside

the hood, with liquids or solvents.

For the internal metal parts, see the previous paragraph.

METAL ANTI-GREASE FILTERS

It is advised to frequently wash the metal lters (at least once a month) leaving

them to soak in boiling water and cleaning solution for 1 hour, taking care not

to bend them.

Do not use corrosive, acid or alkaline detergents.

Rinse them well and wait for them to be completely dry before reassembling

them.

Washing in a dishwasher is permitted, however, it may cause the lter material to

darken: to reduce the possibility of this problem from happening, use low-tem-

perature washes (55°C max.).

To extract and insert the metal anti-grease lters see the assembly instructions.

LIGHTING

The range hood is equipped with high eciency,

low consumption LED spotlights with extremely

long duration under normal use conditions.

Light intensity can be controlled by dimmer.

Should replacement be required, contact a service centre.

DISPOSAL AFTER END OF USEFUL LIFE

The crossed-out trash or refuse bin symbol on the appliance means

that the product is WEEE, i.e. “Waste electrical and electronic equip-

ment'', accordingly it must not be disposed of with regular unsort-

ed waste (i.e. with ''mixed household waste''), but it must be disposed of sepa-

rately so that it can undergo specic processing for its re-use, or a specic

treatment, to remove and safely dispose of any substances that may be harmful

to the environment and remove the raw materials that can be recycled. Proper

disposal of these products contributes to saving valuable resources and avoid

potential negative eects on personal health and the environment, which may

be caused by inappropriate disposal of waste.

You are kindly asked to contact your local authorities for further information

regarding the designated waste collection points nearest to you. Penalties for

improper disposal of such waste can be applied in compliance with national

regulations.

INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES

The EU WEEE Directive was implemented dierently in each country, accord-

ingly, if you wish to dispose of this appliance we suggest contacting your local

authorities or dealer to nd out what the correct method of disposal is.

INFORMATION ON DISPOSAL IN NONEUROPEAN UNION COUNTRIES

The crossed-out trash or refuse bin symbol is only valid in the European Union: if

you wish to dispose of this appliance in other countries, we suggest contacting

your local authorities or dealer to nd out what the correct method of disposal is.

WARNING!

The Manufacturer reserves the right to make changes to the equipment at any

time and without prior notice. Printing, translation and reproduction, even par-

tial, of this manual are bound by the Manufacturer's authorisation.

Technical information, graphic representations and specications in this manual

are for information purposes and cannot be divulged.

This manual is written in Italian. The Manufacturer is not responsible for any tran-

scription or translation errors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Falmec Sirio Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info