9
ENGLISH
SAFET
AND
Installation operations are to be carried out b
stallers in accordanc
ance with the regulations in for
DO NOT use the hood if the pow
disconnect the hood from the electrical power supply and contact the Dealer or an author-
ised Servicing Dealer for repairs.
Do not modify the electrical, mechanical or functional structure of the equipment.
Do not personally try to carr
by incompetent and unauthorised persons can cause serious damage to the unit or
physical and personal harm, not c
W
TECHNICAL SAFETY
Before installing the hood, check the integrity and function of each part.
Should anomalies be noted, do not proceed with installa
the Dealer
Do NOT install the hood if an aesthetic (or c
back into its original package and contact the dealer
No claim can be made for aesthetic (or cosmetic) defects once it has been installed
During installation, always use personal protective equipment (e.g.: Saf
prudent and proper conduct.
The installation kit (screws and plugs) supplied with the hood is only to be used on masonry
walls: in case of installation on walls of a dierent material
keeping in mind the type of wall sur
Keep in mind that installations with dierent types of fastening systems from those sup-
plied, or which are not compliant, can cause electrical and mechanical seal danger
Do not install the hood outdoors and do not expose it to atmospheric elements (rain, wind,
etc.).
ELECTRICAL SAFET
The electrical system to which the hood is to be connected must be in ac-
cordance with local standar
compliance with safety regula
ply with European standards r
Before installing the hood
what is reported on the identication plate located inside the hood.
The socket used to connect the installed equipment to the electrical power supply must
be within reach: otherwise, install a mains switch to disconnect the hood when required.
Any changes to the electrical system must be carried out by a qualied electrician.
The maximum length of the ue fastening screws (supplied by the manufacturer) must be
13 mm. Use of non-compliant screws with these instructions can lead to danger of an elec-
trical nature.
Do not try to solve the problem yourself in the event of equipment malfunction, but contact
the Dealer or an authorised Ser
When installing the hood, disconnect the equipment by removing the
plug or switching o the main switch.
FUMES DISCHARGE SAFETY
Do no connect the equipment to discharge pipes of fumes produced from
combustion (for example boilers
Before installing the hood
the room have been complied with.
USER W
These warnings hav
others.
entirety before using the or cleaning the equipment.
The Manufacturer declines all responsibility for any damage caused dir
directly
safety warnings indicated in this booklet.
It is imperative that this instructions booklet is kept together with the equipment for
any future consulta
If the equipment is sold or transferred to another person, make sure that the booklet is
also supplied so that the new user can be made aware of the hood's operation and relative
warnings.
After the stainless steel hood has been installed, it will need to be cleaned to remov
residues remaining from the pr
not removed, can cause irreversible damage t
the manufacturer recommends using the supplied moist wipes, which are also a
sold separately
Insist on original spare parts.
INTENDED USE
The equipment is solely intended to be used to extract fumes generat
ing food in non-professional domestic kitchens: an
use can cause damage to persons, things, pets and e
any liability
The equipment can be used by children over the age of 8 and by persons with reduced
physical, sensory and mental abilities, or with no experience or knowledge, as long as they
do so under supervision or af
the equipment and understanding of the dangers connected to it.
Children are not to play with the equipment. Cleaning and maint
not be carried out by children without supervision.
USE AND CLEANING
Before cleaning or carrying out maintenance operations
equipment by removing the plug or swit
Do not use the hood with wet hands or bare feet.
Always check that all electrical par
not being used.
The maximum overall weight of any objects placed or hung (if applicable) on the hood must
not exceed 1.5 Kg.
Always supervise the cook
catch re.
Do not leave open, unattended ames under the hood.
Do not prepare food ov
Never use the hood without the metal anti-grease lters: in this case, gr
deposit in the equipment and compromise its operation.
Accessible parts of the hood can be hot when used at the same time as the cook
pliances.
Do not carr
There can be a risk of re if cleaning is not carried out according to the instructions and
products indicated in this booklet.
Disconnect the main switch when the equipment is not used for long periods of time.
If other appliances that use gas or other fuels are being used at the same
time (boiler
are discharged is well-v
INST
only intended for qualied personnel
Before installing the hood, car
STRUCTIONS AND W
TECHNICAL FEA
The technical specications are exhibited on the labels located inside the hood
POSITIONING
The minimum distance between the highest part of the cooking equipment and the
lowest part of the hood is indicated in the installation instructions.
Generally, when the hood is placed ov
(25.6''). However
2002 of
between the cooker and lower part of the hood can be reduced to the quota reported in
the installation instructions.
Should the instructions for the gas cooker specify a greater distance, this must be taken
into consideration.
Do not install the hood outdoors and do not expose it to outdoor environment (rain, wind
etc.).
