Bedienungsanleitung Fantasy Drift 2019 (Seite 14 von 24) (Englisch)

784933

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

CONTROL PANEL OPERATION

3. Press the Light button to store the F1 cycle

and move to the F2 cycle.

4. Press the Plus or Minus button to adjust

the cycle time for F2.

5. Wait 15 seconds to allow the exit timer to

expire and store the setting.

IMPORTANT: To reset the first filter cycle start

time, skip step 5 and continue pressing the Mode

button until the actual temperature is displayed.

Powering down of the spa will also reset the first

filter start time.

FILTER CYCLE SUSPENSION:

The

filter cycle will be suspended every time a jet pump

or light is activated manually during the filter cycle

time. The suspension will end 10 minutes after the

completion of the manual use.

OPERATIONAL MODES

The Standard Mode is the default operational

mode preset from the factory. In order to program

the spa to operate in other modes you must enter

the programming mode to make the change.

NOTE: Freeze Protection (Smart Winter Mode) will

assert as necessary during all modes.

STANDARD MODE:

Is programmed to

maintain the desired temperature with periodic

water circulation (sampling) to sample and heat

the water to the set temperature.

ECONOMY MODE:

This will reduce the set

temperature of the spa by 11°C. Water sampling

and heating of the water is only done during the

filter cycles.

SLEEP MODE:

Water sampling and

heating is only done during the filter cycles

while trying to bring the spa water up to the

set temperature.

QUIET MODE:

Maintains temperature with

periodic sampling between the start of F1 and the

end of F2 while not allowing any water sampling

to happen between the end of F2 and the start

of F1.

To enter the programming screen and toggle

between Standard, Economy, Sleep and Quiet

Modes the following is required:

1. Press and hold the Light button for 5 sec-

onds.

2. Press the Light button several times until

ST, Ec, SL, or NT is displayed.

3. Use the Plus or Minus button to choose

between the Modes.

ST = Standard Mode, Ec = Economy

Mode, SL Sleep = Mode and NT = Quiet

Mode.

4. Wait 15 seconds to allow the exit timer to

expire and store the setting.

OFF MODE:

This mode allows you to stop all

spa functions for 30 minutes to perform quick spa

maintenance. To place the spa in OFF MODE,

press and hold the Jets button for 5 seconds.

The display will toggle between OFF and water

temperature when in the OFF MODE. To stop the

OFF MODE before the 30 minute cycle time is

complete, simply tap (short press) the Jet button.

FAHRENHEIT/CELSIUS SETTING

o change water temperature display to either

Fahrenheit or Celsius, press and hold Light button

for 5 seconds until F1... is displayed. Press the

Light button several times until F or C is displayed.

Press the Plus or Minus button to change. Wait 15

seconds to allow the exit timer to expire and store

the setting.

SMART WINTER MODE

The Smart Winter Mode (SWM) is used to prevent

water from freezing in the plumbing of the spa. As

soon as there is a risk of freezing, this protection

automatically kicks in. The SWM protection will

turn back off only after 24 hours without a risk of

freezing. During this 24 hour period, the Smart

Winter Mode icon remains on; the icon blinks

when the purge is active.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fantasy Drift 2019 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info