22
b) Fast shot: On the camera setup interface, press the “+” or “–” key and choose “Fast shot”. Press
“OK” to display the interface. Press the “>” key, and choose 3 p/s or 6p/s or 10 p/s (photo/second).
Press “OK” again to exit the interface. Press the “M” key to exit the camera setup interface. After press
the “Photo” key to enter the shoot standby mode, the BeastVision video camera continuously takes
three pictures or six pictures or ten pictures when you press the Photo key once.
c) Auto cont capture: On the camera setup interface, press the “–” key and choose “Auto Cont
Capture”. Press “OK” to set the time interval for continuous shooting to 2s, 3s, 5s, 10s, 20s ,30s or 60s
. After press the “>” key to set the time interval. Press “OK” again to exit the intreface. Press the “M”
key to exit the setup interface. At this time, if you press the “Photo” key, the BeastVision video camera
takes a picture at each interval until you press the “Stop” key to cancel shooting.
d) Self Shot: On the camera setup interface, press the “+” key and choose “Timed Shooting”.
Press “OK” to set the time in auto-shooting mode to 3 s, 5 s, or 10 s. Press the “>” key, and choose
“Timed Shooting”. Press “OK” again to save and exit the interface. Press the M key to exit the camera
setup interface. After setting is complete, the BeastVision video camera starts reverse-counting timer
when you press the Photo key once. When the preset time is reached, the BeastVision video camera
takes a picture.
Note:
a) If the memory space gets full, the system will give the message “card is full' on TFT display screen
and goes back to the preview mode
b) The self-timer has to be re-started in order to take another self-shot.
