Bedienungsanleitung Fein AStxe649 1 (Seite 13 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

502864

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

For your safety.

Read all safety warnings and all instruc-

tions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future reference.

Do not use this power tool before you have thor-

oughly read and completely understood this

Instruction Manual and the enclosed “General

Safety Instructions” (document number

3 41 30 054 06 1). The documents mentioned should be

kept for later use and enclosed with the power tool,

should it be passed on or sold.

Please also observe the relevant national industrial safety

regulations.

Special safety instructions.

Hold power tool by insulated gripping surfaces, when per-

forming an operation where the cutting accessory may con-

tact hidden wiring or its own cord. Cutting accessory

contacting a “live” wire will make exposed metal parts of

the power tool ‘“live” and shock the operator.

Keep your hands well away from the saw blade. Do not

place your hands in front of or underneath the saw blade.

Any contact with the saw blade can cause personal inju-

ries. The saw blade can become very hot during the saw-

ing process.

Wear personal protective equipment. Depending on the

application, use a face shield, safety goggles or safety

glasses. Wear ear protection. The safety glasses must be

capable of protecting against flying particles generated by

the various different operations. Prolonged exposure to

high intensity noise may cause loss of hearing.

Secure the workpiece firmly. A work piece that is gripped

tightly in a clamping device or vice, is more secure than if

held by hand.

Do not rivet or screw any name-plates or signs onto the

power tool. If the insulation is damaged, protection against

an electric shock will be ineffective. Adhesive labels are

recommended.

Do not use accessories which are not specifically designed

and recommended by the tool manufacturer. Just because

the accessory can be attached to your power tool, it does

not assure safe operation.

Clean the ventilation openings on the power tool at regular

intervals using non-metal tools. The blower of the motor

draws dust into the housing. An excessive accumulation

of metallic dust can cause an electrical hazard.

Before putting into operation, check the mains connection

and the mains plug for damage.

Hand/arm vibrations

The vibration emission level given in this information

sheet has been measured in accordance with a standard-

ised test given in EN 60745 and may be used to compare

one tool with another. It may be used for a preliminary

assessment of exposure.

The declared vibration emission level represents the

main applications of the tool. However if the tool is used

for different applications, with different accessories or

poorly maintained, the vibration emission may differ.

This may significantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration

should also take into account the times when the tool is

switched off or when it is running but not actually doing

the job. This may significantly reduce the exposure level

over the total working period.

Identify additional safety measures to protect the opera-

tor from the effects of vibration such as: maintain the tool

and the accessories, keep the hands warm, organisation

of work patterns.

Intended use of the power tool:

hand-guided hacksaw for commercial use for cutting

round and other shaped work pieces of metal, plastic and

cement in weather-protected environments using the

application tools and accessories recommended by FEIN.

Operating instructions.

Guide the power tool toward the work piece only

when switched on.

Guide the power tool uniformly and with light feed in the

cutting direction. Excessive feed reduces the tool life of

the application tools.

To increase the tool life of the saw blade when sawing

metal, it is recommended to apply a lubricating agent

alongside the intended cutting line:

– for cuts in steel sheet: Cutting oil,

– for cuts in aluminium: Petroleum.

Character Unit of measure, international Unit of measure, national Explanation

/min spm Stroke rate at no-load

W W Power input

W W Output

dB dB Sound power level

dB dB Sound pressure level

K… Uncertainty

m/s

Acceleration

m, s, kg, A, mm, V, W,

Hz, N, °C, dB, /min, m/s

m, s, kg, A, mm, V, W,

Hz, N, °C, dB, rpm, m/s

Basic and derived units of measure from

the international system of units SI.

WARNING

3 41 01 081 06 0.book Seite 13 Freitag, 1. August 2008 8:37 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fein AStxe649 1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info