Bedienungsanleitung Fein WPO 14-25 E Stainless Steel Professional Set (Seite 18 von 94) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

502254

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

For your safety.

Read all safety warnings and all instruc-

tions. Failure to follow the warnings

and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Do not use this power tool before you have thor-

oughly read and completely understood this

Instruction Manual and the enclosed “General

Safety Instructions” (document number

3 41 30 054 06 1). The documents mentioned should be

kept for later use and enclosed with the power tool,

should it be passed on or sold.

Please also observe the relevant national industrial safety

regulations.

Intended use of the power tool:

hand-guided polisher for dry polishing, sanding with

sanding discs and brushing surfaces of metal, stone, plas-

tic, wood, composite materials, paint/varnish, filler and

similar materials in weather-protected environments

using the application tools and accessories recommended

by FEIN.

This machine is also intended to be powered by a.c. gen-

erators with sufficient power output that correspond

with ISO 8528, design class G2. Compliance with this

Standard in particular is not given when the so-called dis-

tortion factor exceeds 10%. When in doubt, inform

yourself about the generator in use.

Safety warnings common for sanding, sanding with

sanding sheets, working with wire brushes,

polishing and cut-off grinding

This power tool is intended to function as a sander, wire

brush or polisher. Read all safety warnings, instructions,

illustrations and specifications provided with this power

tool. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

Operations such as grinding or cutting-off are not recom-

mended to be performed with this power tool. Operations

for which the power tool was not designed may create a

hazard and cause personal injury.

Do not use accessories which are not specifically designed

and recommended by the tool manufacturer. Just because

the accessory can be attached to your power tool, it does

not assure safe operation.

The rated speed of the accessory must be at least equal to

the maximum speed marked on the power tool. Accessories

running faster than their rated speed can break and fly

apart.

The outside diameter and the thickness of your accessory

must be within the capacity rating of your power tool.

Incorrectly sized accessories cannot be adequately

guarded or controlled.

The arbor size of wheels, flanges, backing pads or any other

accessory must properly fit the spindle of the power tool.

Accessories with arbor holes that do not match the

mounting hardware of the power tool will run out of bal-

ance, vibrate excessively and may cause loss of control.

Do not use a damaged accessory. Before each use inspect

the accessory such as abrasive wheels for chips and

cracks, backing pad for cracks, tear or excess wear, wire

brush for loose or cracked wires. If power tool or accessory

is dropped, inspect for damage or install an undamaged

accessory. After inspecting and installing an accessory,

Character Unit of measure,

international

Unit of measure,

national

Explanation

n /min rpm Rated speed

V V Rated voltage

W W Power input

W W Output

f Hz Hz Frequency

M… mm mm Size of metric thread

dB dB Sound power level

dB dB Sound pressure level

pCpeak

dB dB Peak sound pressure level

K… Uncertainty

m/s

Vibration emission value (triax vector sum) deter-

mined according to EN 60745

m/s

Mean vibrational value for polishing

m/s

Mean vibrational value for sanding with sanding

sheet

m, s, kg, A, mm, V,

W, Hz, N, °C, dB,

min, m/s

m, s, kg, A, mm, V,

W, Hz, N, °C, dB,

min, m/s

Basic and derived units of measure from the inter-

national system of units SI.

h,P

h,DS

WARNING

3 41 01 113 06 0.book Seite 18 Dienstag, 8. Dezember 2009 7:51 07

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fein WPO 14-25 E Stainless Steel Professional Set Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info