Bedienungsanleitung Fein WSG14 70ET (Seite 7 von 85) (Englisch, Französisch, Spanisch)

502068

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

Safety warnings specific for sanding

operations

Do not use excessively oversized sanding disc

paper. Follow manufacturers recommenda-

tions, when selecting sanding paper.

Larger

sanding paper extending beyond the sanding

pad presents a laceration hazard and may

cause snagging, tearing of the disc, or kick-

back.

Safety warnings specific for wire

brushing operations

Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive load

to the brush.

The wire bristles can easily pen-

etrate light clothing and/or skin.

If the use of a guard is recommended for wire

brushing, do not allow any interference of the

wire wheel or brush with the guard.

Wire

wheel or brush may expand in diameter due

to work load and centrifugal forces.

Additional safety warnings

Use elastic spacers/liners when these are pro-

vided with the grinding accessory.

Make absolutely sure that the accessory is

mounted in accordance with the manufac-

turer’s instructions. The mounted accessory

must be able to rotate freely.

Incorrectly

mounted accessories can loosen during oper-

ation and fly off.

Handle accessories carefully and store them

according to the manufacturer’s instructions.

Damaged accessories can form cracks and

break off during operation.

When using application tools with a threaded

insert, take care that the thread in the applica-

tion tool is long enough to hold the spindle

length of the power tool. The thread in the

application tool must match the thread on the

spindle.

Incorrectly mounted application tools

can loosen during operation and cause inju-

ries.

Do not machine any material containing asbes-

tos.

Asbestos is carcinogenic.

Beware of any concealed electric cables, gas or

water conduits;

check the working area with a

metal detector, for example, before com-

mencing work.

Use a stationary extraction system, blow out

ventilation slots frequently and connect a

residual current device (RCD) on the line side.

When working metal under extreme operat-

ing conditions, it is possible for conductive

dust to settle in the interior of the power

tool. The total insulation of the power tool

can be impaired.

This double-insulated power tool is equipped

with a polarized plug (one contact is wider than

the other). The plug will only fit into the polar-

ized socket outlet in one position. Turn the plug

if it does not fit completely into the socket out-

let. If the plug still does not fit, have a qualified

electrician install a polarized socket outlet. Do

not modify or alter the plug under any circum-

stances.

Double-insulated power tools nei-

ther require a three-core power cable nor a

power connection with ground contact.

Operate the power tool only off of power sup-

plies whose voltage and frequency values cor-

respond with the values on the type plate of the

power tool.

When operating the power tool in a damp envi-

ronment, it must be connected via a ground-

fault circuit interrupter (g.f.c.i.).

Using special

rubber protective gloves and footwear

increase your own safety.

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your

body leaves it unstable and may lead to loss of

control.

Before mounting or replacing application tools

or accessories, pull the power plug.

This pre-

ventive safety measure rules out the danger of

injuries through accidental starting of the

power tool.

Use appropriate detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance.

Contact

with electric lines can lead to fire and electric

3 41 01 121 21 0.book Seite 7 Mittwoch, 20. Mai 2009 2:23 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fein WSG14 70ET Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info