Bedienungsanleitung Felisatti DHF16 (Seite 4 von 32) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502465

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Follow very carefully the instructions in this manual, save it

and keep close at hand, ready to carry out any inspection of

parts that may be necessary.

If the machine is used carefully and normal maintenance is

carried out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

A. Safety screw (Fig.3)

B. Keyless chuck (Fig.2)

C. Drill chuck shaft gap (Fig.2)

D. Machine neck (Fig.3)

E. Striking-drilling lever (Fig.1)

F. Mechanical speed shift lever (Fig.1)

G. Depth stop (Fig.1)

H. Auxiliary grip (Fig.1)

I. Turn direction lever (Fig.1)

J. On-/off switch (Fig.1)

K. Retainer button (Fig.1)

L. Key-operated drill chuck (Fig.1 and Fig.3)

M. Drill chuck key (Mod. FPD18/2-FPD18/2RE)

(Fig.3)

N. Depth stop xing wing nut (Fig.1)

O. Spindle lock button (Mod. DHF22/1200ERP2)

(Fig.1)

BRIEF DESCRIPTION

A mechanical percussion unit generates the power necessary

for hammer drilling in stone or concrete.

Use of the tool: These hammer drills can be used for hammer

drilling in stone, drilling in wood, metal as well as plastic,

and also for driving screws with driving bits installed in a key

chuck. Any other use not mentioned is not allowed.

TECHNICAL DATA

Additional features of the hammer drill:

- The machine is equipped with a safety clutch or mechanism

which operates when a bit seizes up, protecting the user

and the machine’s electro-mechanical parts. The clutch is

released automatically.

Warning! This machine must not be used with hole saws, core

bits, diamond bits, etc, as they tend to jam in the hole easily.

This would cause the safety clutch to trip out too often.

- Change direction of rotation with switch lever I –due to a

lockout mechanism, switching the lever is only possible if the

On/off switch J is not depressed.

- Electronic control of spindle speed, innitely variable by

nger pressure on the On/off switch J.

- For continuous operation the On-/Off switch can be locked

in the “On” position by the button K.

- Adjustable auxiliary handle H, with integral depth gauge G.

BEFORE USING THIS TOOL

WARNING! Before carrying out any work, check, for instance,

using a metal detector, that there are no electric wires or gas

or water pipes under the surfaces you wish to work on. Make

sure the mains voltage is correct: it must be the same as that

on the specication label. Machines with 230V can also be

connected to a 220-V mains supply. To turn the machine on,

press the ON/OFF switch J and keep it pressed down. When

the ON/OFF switch is released, the machine stops.

WARNING! Always disconnect the plug from the socket

before doing any work on the machine.

1. Drill chuck

These models feature key-operated drill chucks L.

Changing drill chucks (Fig. 3)

Insert it in the tool and tighten with drill chuck key M uniformly

on each of the three holes.

Remove the drill chuck by opening it all the way and

completely unscrewing screw A.

WARNING: Screw A has left-hand threads. Hold the shaft at

gap C with a wrench and turn the drill

Hammer drill DHF13/810ER2 DHF16/1000ER2 DHF22/1200ERP2

Rated power W 810 1000 1050

No load speed /min 0-830/0-2000 0-1200/0-2500 0-1000/0-2000

Work shaft thread UNF ½”x20 ½”x20 ½”x20

Drill chuck capacity mm 1,5…13 1,5…13 1…16

Max. steel capacity mm 13 16 22

Max. wood capacity mm 35 40 50

Max. concrete capacity mm 16 20 35

N strikes in load /min. 13280-32000 20000-42000 16660-34000

Ø head setting neck mm 43

Acoustic pressure dB(A) 96 93 96

Sound-power level dB(A) 107 104 107

Vibration acceleration m/s² 18,6 14,7 19,5

Weight according EPTA-

Procedure 01/2003

Kg. 2,6 2,8 3,8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti DHF16 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info