Bedienungsanleitung Felisatti HF30 (Seite 4 von 28) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

502479

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TECHNICAL DATA

Follow very carefully the instructions in this manual, save it

and keep close at hand, ready to carry out any inspection of

parts that may be necessary.

If the machine is used carefully and normal maintenance is

carried out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See gures)

1. Tool holder (hexagon socket)

2. Front cover

3. Tool retainer

4. ON/OFF switch

5. Lock-on button

6. Supply cord with plug

7. Oil gauge

8. Auxiliary handle

9. Ventilation slots

BRIEF DESCRIPTION

This power tool is designed for chiselling, chipping and

demolishing concrete, rocks and asphalt with high efciency.

A pneumatic percussion unit generates the power necessary

for hammer drilling or chiselling in masonry.

Just like when we hit a conventional chisel with hammer,

a free piston strikes the bit or chisel, which can move

lengthways, through an intermediate part.

This free piston is driven by a second piston activated by an

electric motor through an air cushion. This electro-pneumatic

principle offers great percussion elasticity and work free from

recoil.

BEFORE USING THIS TOOL

WARNING! Before carrying out any work, check, for instance,

using a metal detector, that there are no elec-tric wires or gas

or water pipes under the surfaces you wish to work on.

Make sure the mains voltage is correct: it must be the same

as that on the specication label. Machines with 230V can

also be connected to a 220-V mains supply.

WARNING! Always disconnect the plug from the socket

before doing any work on the machine.

Always check the position of ON/OFF switch. The power tool

must be connected to the power supply socket only when

this switch is in OFF position. If the plug is con-nected to

a receptacle while the power switch is in the ON position,

the power tool will start operating im¬mediately, which could

cause a serious acci¬dent.

• Make sure the cord and the plug are in order. If the

replacement of the supply cord is neces¬sary, this has to be

done by the manufacturer or his agent in order to avoid a

safety hazard.

• Switch off and unplug the machine prior to any proce-

dure on the power tool or in case of mains drop out.

• In case of work area remote from the power source,

use as short as practicable extension cord with proper cross-

section.

• Make sure the auxiliary handle is properly mounted and

securely fastened.

CHANGING THE POSITION OF

THE AUXILIARY HANDLE

hanging the position of the auxiliary handle

1. Unscrew the auxiliary handle M in an anticlockwise

direction.

2. Turn the auxiliary handle M to the required position.

3. Screw the auxiliary handle M in place again.

FITTING THE WORKING TOOLS

1. Clean and then smear the tool shank with grease or

machine oil (Fig. 1).

2. Pull the tool retainer lever (3) toward yourself.

3. Rotate 180° clockwise the tool retainer lever (3) while

pulling it.

4. Next, insert the tool shank into the hexagonal tool holder

(1) on the front cover (2).

5. Clamp the tool by turning the tool retainer (3) by half a turn

in the opposite direction (Fig. 2).To remove the bit, follow the

above described procedures in reverse order.

MAINS CONNECTION

Warning! Connect only to a single-phase AC current supply

and only to the mains voltage specied on the rating plate.

Connection to sockets without earth protec-tion is possible as

the appliance features protective class II insulation according

to European Standard EN50114. Radio interference

suppression complies with the European Standard EN

55014.

SWITCHING ON - SWITCHING OFF

Brief activation:

Model HF25/1500 HF30/2000V

Rated power

W 1500 2000

Impact rate

/min 1400 1500

Impact energy

J 25 11

Tool holder/bit length

mm 30/410

Acoustic pressure

dB(A) 80,6 84,0

Sound-power level

dB(A) 105 106

Vibration acceleration

m/s² 27.0 15,3

Weight according EPTA-Procedure 01/2003 Kg. 16,0 19,8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti HF30 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info