Bedienungsanleitung Felisatti JSF100 (Seite 3 von 47) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Finnisch)

502488

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

TECHNICAL DATA

Jig saws JSF100/650VE

bsorbed powe

W 650

Wood cutting capacity mm 100

luminium cutting capacit

mm 20

Steel cutting capacity mm 6

Inclination up to 45º

Run-out mm 25

No-load speed /min 500-3000

pprox. weight (without accessories) Kg. 2.5

The instructions contained in this manual must be

strictly followed, it should be carefully read and kept

close at hand to use when carrying out maintenance on

the indicated parts.

If the machine is used carefully and normal

maintenance is carried out, it will work well for a

long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See figures)

A On/Off switch (Fig.1)

B Retaining button (Fig.1)

D Constant electronic speed regulation (Fig.1)

E Pendular regulation control (Fig.1 and Fig.3)

F Retaining lever (Fig.2)

H Saw blade guide (Fig.2)

I Support base fixing screw (Fig.5)

J Sliding skid (Fig.1, Fig.7 and Fig.8)

K Anti-splinter plate (Fig.4)

L Support base (Fig.1, Fig.4 and Fig.6)

M Dust suction adapter (Fig.1 and Fig.6)

N Dust suction adapter tab (Fig.6)

O Oscillation amplitude label (Fig.1)

P Cutting depth graduated scale (Fig.1 and Fig.5)

EQUIPMENT

- 1 saw blade

- 1 anti-splinter plate

- 1 dust suction adapter

- 1 sliding skid

- Hexagonal key

- Operating instructions

- Safety instructions

- Warranty

SAFETY INSTRUCTIONS

• See “Safety Instructions” manual supplied with this

instruction manual.

• WARNING! Never use the machine without protective

covers. Maintain protective covers in place.

• For your personal safety, always connect the ma-

chine to a mains supply protected by a differential

and thermal cutout switch, in accordance with regula-

tions on low-voltage wiring sitemaps.

• Do not perforate the machine casing, as this would

destroy the protective insulation (use adhesive la-

bels).

• Check the work area with a metal detector for hidden

wires, gas and/or water pipes.

• Always unplug the machine before carrying out work

on it.

• Always stop the machine by switching it off, not by

unplugging it.

• WARNING! Before each use, inspect the plug and

lead. Should they need replacing, have this done by

an official service centre.

• Always keep the lead out of the machine's working

area.

• Only plug the machine in when it is switched off.

• Always use the machine with the auxiliary handle

attached.

• Hold the machine firmly in both hands and in a stable

position.

• Ensure that the part to be worked on is firmly secured

before beginning any operation.

• When sawing metal, apply oil to the cutting point.

• Always use the correct saw blade for each type of

material.

• Only use sharp saw blades which are in perfect

condition. Cracked, bent or jagged saw blades should

be immediately replaced.

• Do not force the saw feed which is adapted to the

type and thickness of the material being worked.

• When sawing, follow the direction of the saw teeth:

force being applied by lateral shifts, will only lead to

breaking the blade.

• Beware of shavings that fly off. Hold the tool that so

that sparks fly away from you or other people and

inflammable materials.

• Do not exert excessive pressure on the base since

this serves as a support and doing so will merely

brake the saw feed.

• If thin sheets are to be cut, we recommend supporting

them on a wooden base to avoid vibration of the

sheet and accidents.

• Ensure that the base plate is totally supported by the

work surface before beginning work.

• The cutting path must be free from any obstacles,

both above and below.

• In no case turn the machine on with the saw blade in

contact with the material, since this places undue

strain on the blade. Insert the saw blade when the

machine has reached the selected speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti JSF100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info