Bedienungsanleitung Felisatti NTF305 (Seite 6 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

502512

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

INTRODUCTION

Congratulations on your purchase of a new series

FELISATTI mitre saw, a high-quality product that will

complete your set of professional tools. This new

series represents the further evolution of the

renowned mitre saws developed by FELISATTI.

If any malfunctions ever occur during operation,

you will always be able to rely on the network of

authorised Assistance Centers. All FELISATTI

movable tools comply with Standard EN 61029,

Machine Directive 98/37/EC and amendments,

with 2006/95/EC and 93/68/EEC, and in regard to

electromagnetic compatibility, with Directive 89/336/

EEC, EN 55014.1, EN 55014.2, EN61000.3.2 and EN

61000.3.3 and EN 50366.

If used with the care and serviced regularly, this tool

will provide long-lasting and reliable service. Carefully

follow the instructions contained in this manual, using

them for reference for any eventual controls that may

need to be carried out.

1 GENERAL INFORMATION

1.1 THE AIM OF THIS MANUAL

This manual has been prepared by the Manufacturer

as an integral part of the mitre saw equipment. The

information contained is for the benet of professional

operators. This manual denes the purpose for which

the mitre saw was designed, and contains all the

information necessary to ensure safe and correct

use. We therefore recommend reading the manual

carefully before proceeding to any form of adjustment,

operation or maintenance. Constant respect for the

contents of this manual ensures both machine and

operator safety and the most economical and longest

working life of the machine itself. Photographs and

drawings have been supplied by the manufacturer for

exemplifying purposes; with the aim of following

a policy of constant development and product

modernisation, the manufacturer is entitled to make

modications without forewarning.

1.2 MITRE SAW IDENTIFICATION

Plate A (g. 1) provides mitre saw model information

and technical data of the motor and of its manufacturer;

Plate B provides mitre saw model identication.

1.2.1 IDENTIFICATION (g. 1)

A Data plate

B Logotype plate

C Upper table

D Movable upper casing

E Handgrip

F Machine lock pin

G Lower support stroke-end raised section

H Turntable

I Fixed casing

J Blade

K Machine lock knob 0°- 45°

L Turntable lock knob

M Movable lower blade protector

N Upper table ne adjustment

O Release lever

P Base

Q Support

R Main body

S Upper table locking knob

1.3 MANUFACTURER – IDENTIFICATION

Interskol Power Tools S.L.

Carretera de Sant Joan de les Abadesses s/n17500

RIPOL, (Girona), SPAIN

Tel +34972700200 - Fax +34972700554E-mail:

e-mail: felisatti@interskol.es

2 TECHNICAL CHARACTERISTICS

A sturdy, high-reliability structure ensures that these

mitre saws will be able to cut wooden boards and

PVC and aluminium pipe in industrial environments

at no expense to the machine essential handiness

or portability. All models are equipped with spacious

upper tables that permit the mitre saw to be easily

transformed into a disk saw to perform cuts of up to

40 mm thickness, engraving, facing, and trimming.

Only one operator is required for the use of the mitre

saw, which has been designed and constructed in

compliance with Standard EN 61029. All models are

equipped with release switches featuring LOCK in

‘ON’ buttons. All models come with minimum voltage

circuits that prevent the accidental restarting of the

machine after interruptions in power supply because

in such cases the operator is always required to reset

work conditions; a high-power and high-efciency

asynchronous motor ensures silent operation at all

rpm levels. The machine also comes with a motor

brake that permits the blade to be stopped within 10

seconds of the release of the button on the switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti NTF305 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info