Bedienungsanleitung Felisatti RH36 (Seite 6 von 36) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

500415

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

for safety before starting operation.

Forconvenienceinoperation,assemblethesidehandleat

thefrontoftoolandperform

Assembling Side Handle

1.Puttheforward/backwardleverinneutralposition(locked)

orremovethebattery.

2. Turn the side handle counterclockwise to unfasten the

bandandbandholder.

3.Turnthesidehandletoadesiredposition.

4.Turnthesidehandleclockwisetocompletelyxed.

Adjusting Stopper Position

1.Turnthesidehandlecounterclockwisetounfastenstopper

holder.

2.Makeadjustmentsuchtoletthestoppermoveintodesired

position. (When stopper is used, boring to the extent as

clearancebetweenthedrillbitandstopperisavailable.)

3.Turnthesidehandleclockwiseandxitsuchthatstopper

doesnotmove.

Left-hander should detach the tool holder assembly and

assemblethesidehandlein

reversedirectionandpositionbeforestartingoperation.

ATTACHING AND DETACHING TOOL BIT

ATTENTION: Be sure to wear protective gloves for

changing hot tool bit during operation.

Be sure to put off the switch and unplug power cord

before attaching or detaching a tool bit.

 Attaching and Detaching SDS-plus Bit (Fig.5)

1. Wipe the bit and insert clean and coat grease before

attachingit.

2.Checkdustcapforclean.Changethedustcapwithnew

oneifitsbrokenandclean

it.

3.Afterinsertingthebit,turntoapositionyouhearclick.

4.Afterattachingthebit,testtopullitouttocheckforrm

attachment.

5.Todetach thebit,turntheretainerin directionof arrow

andremove.

 Removing Tool Holder and Attaching Quick Change

Drill Chuck (Fig.7)

Forsafetypurpose,removethestopperfromsidehandleand

bitfromthetool.

When changing tool holder and quick change drill chuck,

positionthechangeleverinHammerMode.

1. Put the forward/backward lever in neutral (locked) or

removethebattery.

2.Turnthetoolholdercounterclockwiseandthenremoveit

fromthemainbody.

3.Afterassemblingthequickchangedrillchucktothemain

body,turntheadaptercoverclockwisetoapositionyouhear

click.

CHANGING REVOLUTION DIRECTION (Fig.6)

Be sure to change the direction of revolution only in

static condition.

Abuse changing operation may cause broken tool.

Forward/Backwardlevercanbeusedtoselectdirectionof

revolution.

1. Forward (Turning right): Push the forward/Backward

levertotheextremeofleft.

2. Backward (Turning left): Push the forward/Backward

levertotheextremeofright.

ADJUSTING RPM

1. RPM Control Using Shift Switch The switch features

revolutionspeedcontrolwhichcancontrolfromzeroto

Max. speed by pulling. Pulling more increases revolution

speed.

SOFT START FEATURE

Soft Start features decreasing torque transmitted to the

operatorandunitwhenstartingthetoolwithbitonexisting

positionofhole.Italsofeaturesgradualspeedingupafterthe

toolisstartedtopreventthebitoffitsworkingposition.

SAFETY CLUTCH

SafetyClutchfeatureisactivatedwhenaspeciedtorque

level isreached.When Safety Clutchfeature is activated,

revolutionofbitstopsandmotorreleased.

OPERATING MODE (Fig.8)

1.Todrillintostoneandconcreteandthelike,positionthe

changeleverinHammerDrillingmodeasillustratedinthe

rst diagram. In Hammer Drilling mode, the tool makes

drilling andblowingat the simultaneously. Use drillbitfor

HammerDrillingmode.

2.Forchiselingandbreakingoperation,positionthechange

leverinHammermodeasillustratedintheseconddiagram.

InHammerringmode,thetoolmakesonlyblowingoperation

withoutrevolutionofbit.Useballpointorchiselforoperation

inHammerringmode.

3.Fordrillingortappingintowood,metalorplasticmaterials,

positionthechangeleverinDrillingmodeasillustratedinthe

thirddiagram.InDrillingmode,thetoolmakesonlydrilling

withoutblowing.Usethedrillbitorkeylesschuckandthelike

forDrillingmode.

ADJUSTING CHISEL ANGLE

Whenperformingchiseloperation,chiselanglecanbeset

at22.5/16forconvenience.Tochangebitangle,putchange

leverinandturnthetoolholderclockwiseorcounterclockwise

toaposition.Whenperformingplainchiseloperation,recover

the change lever to Hammer mode again after adjusting

angle,andthenstartoperation.

MAINTENANCE

CHECKING THE TOOL (BIT)

Usingtheworn-offBitwillcauseoverloadingthemotorand

reduceworkefciency.Eithersharpenthetoolorreplacewith

anewone.

CHECKING THE SCREWS

Checkifanyscrewislosen.Losenscrewmustbefastened

rmly.

Felisatti RH36 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info