Bedienungsanleitung Felisatti RSF120-1010 (Seite 4 von 28) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

502493

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at hand to

use when carrying out maintenance on the indicated parts.

If the tool is used with care and normal maintenance is carried

out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual.

Any other use of the tool is strictly forbidden.

See safety regulations attached to this statement.

ILLUSTRATIONS

Description (See gures)

1 Saw blade

2 Adjustable footplate

3 Saw blade holder

4 Locking sleeve for saw blade

5 On/Off switch

6 Lock-off button for On/Off switch

7 Handle (insulated gripping surface)

8 Lever

9 Constant electronic speed regulation

BRIEF DESCRIPTION

The machine is intended for sawing wood, plastic, metal

and building materials while resting rmly on the workpiece.

It is suitable for straight and curved cuts. When using the

appropriate bimetal saw blades, it is possible to cut ush to the

workpiece surface. The saw blade recommendations must be

observed. Use only ½” universal shank saw blades. The saw

blade should not be longer than required for the intended cut.

BEFORE USING THIS TOOL

Before using the tool, make sure the mains voltage is

correct: it must be the same as that on the specication

label. Machines with 230 V can also be connected to a 220

V mains supply. Before plugging the tool in, always check

that On/Off switch is functioning normally and returns to Off

when released.

REPLASING/INSERTING THE SAW BLADE

Inserting the Saw Blade

Turn the locking sleeve 4 approx. 90° in the direction of the

TECHNICAL DATA

CHARACTERISTICS RSF120/1010E

Cutting capacity, max.

– in wood, mm

– in non-alloy steel, mm

250

120

Run-out, mm 28

Rated power input, W 1010

Voltage, V 220±10%

Frequency, Hz 50±5%

Stroke rate at no load, min

-1

300-2500

Weight according EPTA-Procedure 01/2003, kg 3,8

Sound pressure level, dB(A) 93

Sound power level, dB(A) 104

Protection class II

arrow and hold. Push the saw blade 1 into the saw blade

holder 3. Release the locking sleeve 4 again. Check the

tight seating of the saw blade. A loose saw blade can fall

out and lead to injuries. For certain work, the saw blade 1 can

also be turned through 180° (with the teeth pointed upwards)

and re-inserted again.

Removing the Saw Blade

Turn the locking sleeve 4 approx. 90° in the direction of the

arrow and hold. Remove the saw blade 1.

OPERATION

Pivoting and Retractable Footplate

Due to its movability, the adjustable footplate 2 adapts to the

required angular position of the surface. Depending on the

saw blade being used and the application, the footplate 2 can

be moved in lengthway direction in three steps.

Move the lever for the footplate 8 and slide the footplate 2

to the required position. Move the footplate lever 8 to initial

position.

Starting the tool

WARNING! Plug the machine in with the switch off.

Pressing On/Off switch will turn the machine on and

releasing it will turn it off again. For continuous operation,

press On/Off switch and lock it in the operating position

using button retainer B. If the On/Off switch is depressed and

released once again, the machine will stop.

Speed regulation

Regulator 9 is located in the upper section of the handle.

Regulator 9 is used to set the required speed. Position A

corresponds to the minimum speed and position F is the

maximum speed.

Electronic regulation can be carried out with the machine

running.

The optimum number of strokes depends on the material and

particularly on the working conditions. The table below allows

to choose optimal speed for various types of materials.

Materials Position of speed regulator

Wood D-F

Steel C-E

Alloy steel C-D

Aluminum C-F

Plastic A-D

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti RSF120-1010 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info