Bedienungsanleitung Felisatti SDF8 (Seite 4 von 28) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

502467

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at hand to

use when carrying out maintenance on the indicated parts.

If the tool is used with care and normal maintenance is carried

out, it will work well for a long time.

The functions and use of the tool you have bought shall be

only those described in this manual. Any other use of the tool

is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION(Seegures)

AScrewdriverplate(Fig.1)

BLimitofscrewdepth(Fig.1)

CAdjustmentcylinder(Fig.1)

DBeltclip(Fig.1)

ECoolingvent(Fig.1)

FReverseswitch(Fig.1)

GOn/Offswitch(Fig.1)

HLockingbutton(Fig.1)

IElectronicspeedregulationcontrol(Fig.1)

EQUIPMENT

- Operating instructions

- Safety instructions

- Warranty

BEFORE USING THIS TOOL

Before using the tool, make sure the mains voltage is correct:

it must be the same as that on the specication label.

Machines with 230V can also be connected to a 220-V mains

supply.

Before plugging in the tool, always make sure the control

triggerswitchGworksproperlyandreturnstothe(“OFF”)

position when released.

STARTING THE TOOL

WARNING! Check that the mains voltage is the same as that

inthemachine’sspecications.

Plug the machine in with the switch off. Press switch button G

to start the machine and release to stop.

For continuous action, press the switch G and block with

button H.

The machine can be stopped again by pressing and releasing

button G.

Locking the switch is not advisable for precision work.

Electronic speed regulation

These models include the On/Off switch G, a speed regulator

I which permits selection of the speed most

suitableforthespecicjob.

TherequiredspeedisobtainedusingspeedregulatorI,to

the left and right as applicable.

Electronic regulation can be carried out with the machine

running.

Changing direction of rotation left/right.

Select direction of rotation with reversing lever F.

Due to a locking mechanism, the reversing switch F can only

be switched when the On-/off switch G is not depressed. Only

activate the F commutation switch with the machine turned

off.

Setting the depth gauge

TheCadjustmentbushinghas8positions(0.2mm/turn)that

allow the choice of screw depth based on the screw head.

Set the C adjustment bushing all the way forward, until

it stops. Set the screw depth by turning the C adjustment

bushing:

To the right = more screw depth.

To the left = less screw depth.

Next, turn the C adjustment bushing all the way back.

The best way to adjust correctly is make a trial screw hole.

The screw is held in place with a universal magnetic

support.

Presstheendofthescrewrmlyagainstthematerialtobe

screwed until the B depth limit and the screwdriver sheet

disconnect.

To loosen screws, move the F lever to the L position, move it

to the left and remove the B screw depth by tilting it forward.

CHANGING THE PLATE

To change the screwdriver plate A, remove the B screw depth

by tilting it forward.

The pre-selection of the screw depth will be changed and you

will have to readjust the limit.

TECHNICAL DATA

Screwdriver SDF8/700ER

Input power W 701

No-load speed /min 0-4000

Electronic / Reversible Yes

Tool holder capacity inner hexagon mm 6,35

Max. diameter of the screw mm 6

Torquespeed Nm 11

Acoustic pressure dB(A) 82

Sound-power level dB(A) 95

Vibration acceleration m/s² 2,7

Weightaccording EPTA - Procedure 01/2003 Kg 1,82

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti SDF8 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info