Bedienungsanleitung Fellowes Lunar laminator (Seite 4 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

502522

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

CAPABILITIES

ENGLISH

- The machine is for indoor use only. Plug the machine into an easily accessible socket.

- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets and set the machine before final laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources.

DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

DO ensure self-adhesive pouches are only used with the cold setting.

DO NOT leave the power cord in contact with hot surfaces.

DO NOT leave power cord hanging from cupboards or shelves.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine.

DO NOT exceed the machines quoted performance.

DO NOT allow children to use this machine without adult supervision.

DO NOT laminate sharp or metal objects (eg: staples, paper clips).

DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot

settings.

DO NOT laminate with self-adhesive pouches on hot settings.

DO NOT laminate an empty pouch.

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

LAMINATOR CONTROLS

A On / off switch

B Ready LED

C Release lever ( )

D Carry handle

E Pouch / document entry slot

F Pouch / document exit

G Power on LED

‘Release’ function

To remove or re-align a pouch during lamination, activate the release lever

located on the top of the machine. The pouch can only be removed from the

entry slot when the lever is activated.

• For best results, use Fellowes ® brand pouches: Enhance 80

• This machine does not need a carrier to laminate. It is a carrier-free

mechanism.

• Always put the item to be laminated into the appropriate sized pouch.

• Always test laminate with a similar size and thickness before final process.

• Prepare pouch and item for lamination. Place item within pouch centred

and touching the leading sealed edge. Ensure the pouch is not too large for

the item.

• If required, trim excess material from around the item after lamination and

cooling.

FEATURES & TIPS

Performance

Format A3 or A4

Entry width A3 = 325mm

A4 = 240mm

Pouch thickness (min) 75 microns (per side)

Pouch thickness (max) 80 microns (per side)

Warm up time (estimate) 5 minutes

Cool down time 60-90 minutes

Lamination speed (+/- 5%) approx. 30cm/min (fixed speed)

Number of rollers 2

Ready indication Light

Release lever Yes

Clear Path / Anti-jam engine Yes

Technical Data

Voltage / Frequency / Current(Amps) A3 = 220-240V AC, 50/60Hz, 1.2A

A4 = 220-240V AC, 50/60Hz, 1.0A

Wattage A3 = 220 Watts

A4 = 155 Watts

Dimensions (HxWxD) A3 = 495 x 160 x 105 mm

A4 = 400 x 160 x 105 mm

Net weight A3 = 1,5 kg

A4 = 1.2 kg

Max document thickness

(laminating capacity) 1 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fellowes Lunar laminator Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info