Bedienungsanleitung Fellowes Pulsar E300 (Seite 5 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

502657

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship for

2 years from the date of purchase by the original consumer. If any part is found to be defective

during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes’

option and expense, of the defective part. This warranty does not apply in cases of abuse, mishan-

dling or unauthorised repair. Any implied warranty, including that of merchantability or tness for

particular purpose, is hereby limited in duration to the appropriate warranty period set forth above.

In no event shall Fellowes be liable for any consequential damages attributable to this product.

This warranty gives you specic legal rights. You may have other legal rights that vary from this

warranty. The duration, terms and conditions of this warranty are valid worldwide, except where

different limitations, restrictions or conditions may be required by local law. For more details or to

obtain services under this warranty, please contact Fellowes or your dealer.

CORRECTING A BOUND DOCUMENT

Additional sheets may be include or removed at any time by opening and then closing the comb as previously described.

REMOVAL OF WASTE CLIPPINGS

The waste tray is located under the machine and is accessed from the right side. For best results empty the tray regularly.

STORAGE

Switch off the machine. Lower the lid. The Pulsar-E comb binder is designed to be stored horizontally on the desk.

TROUBLESHOOTING

Problem

No Green power neon

Red standby neon

Punched holes are not central

Machine will not punch

Punch holes are not parallel to edge.

Waste tray leaks

Partial holes

Damaged hole edges

Waste tray leaks

Cause

Machine is not switched on

Machine is overloaded when punching

Edge guide not set

Blockage

Debris is stuck below dies.

Waste tray is not correctly inserted or ‘burst feature’ has activated

Sheets not correctly aligned to punch pattern.

Possibly overloading the machine

Waste tray is not correctly inserted or ‘burst feature’ has activated

Solution

Switch on machine at rear next to plug inlet and at the socket.

Press the punch button. The machine will withdraw the punches and re-set

itself. Continue this process until the punch cycle is complete

Adjust edge guide until hole pattern is correct

Check waste tray is empty. Check for blockage to paper entry.

Take stiff cardboard and slide into the paper entry. Move the cardboard

sideways to release any stray clippings into the waste tray.

Check waste tray is empty and ‘burst feature’ is closed.

Adjust edge guide and test punch scrap sheets until correct

Punch plastic covers with paper sheets. Reduce number of sheets being

punched.

Check waste tray is empty and ‘burst feature’ is closed.

Need Help?

Customer Service….

www.fellowes.com

Let our experts help you

with a solution.

Always call Fellowes

before contacting

your place of purchase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fellowes Pulsar E300 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info