Bedienungsanleitung Fender BXR 200 (Seite 2 von 7) (Englisch)

470118

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Congratulations on your purchase of the Fender BXR

200

Bass amplifier. The BXR 200 is Fender’s most recent effort

in state-of-the-art bass amplifier technology, and is a mem-

ber of the FENDER BXR series. The design of the BXR 200

was carried out with the aid of some of today’s best bass

players, and represents years of thought and consideration

in determining features and specifications. The features

included in the BXR 200 will provide a forum for almost

every conceivable playing style, from “traditional” to “con-

temporary”, and those yet to come.

The preamp section of the BXR 200 features two inputs of

differing sensitivities, allowing for the use of a wide variety

of input sources and levels. A trio of ENHANCEMENT but-

tons are provided to enhance the low, mid, and high end of

the frequency spectrum. HIGH and LOW shelving controls

allow response tailoring of the high and low frequency

sounds you and your instrument produce. The 9-band

GRAPHIC EQ allows for up to 12 decibels of boost or cut in

nine bands between 80 Hz and 8kHz. Processors from sim-

ple battery powered devices to professional rack mounted

studio effects may be used at will. This facility is accom-

plished through the use of the back panel EFFECTS LOOP

SEND and RETURN.

The rugged power amplifier is designed to give years of

reliable service under all conditions. It is equipped with our

exclusive DELTACOMP

adaptive compressor system. With

DELTACOMP, it is practically impossible to clip (distort) the

power amplifier. The apparent release time of the compres-

sor is short, yet distortion at low frequencies is kept to a

minimum.

The inclusion of CHORUS infinitely widens the range of

tonalities the BXR 200 can produce. By incorporating the

chorus circuitry within the power-amp/compressor loop,

the need for complicated and expensive compounding (qui-

eting) circuitry has been eliminated.

The BXR 200 incorporates a highly efficient, computer-

designed, tuned-port cabinet, and delivers a full 200 watts

R.M.S. to its single fifteen inch Fender Special design dri-

ver. The BXR 200 HEAD is designed to perform well with

any high quality speaker system, but performs best when

used with members of the FENDER BXR series, which

include various combinations of ten inch and fifteen inch

speaker enclosure systems.

The selection of a Fender amplifier will reward you with

years of quality performance and a wide range of musical

sounds. This manual is designed to familiarize you with the

equipment and to acquaint you with its many features.

Please read it carefully so you will benefit from all the fea-

tures as soon as you start using the amplifier.

The built in quality of a Fender amplifier is the result of over

four decades of dedication, and the combined skills of

research and development by our engineers and musicians.

That is why we proudly say...FENDER, The Sound that

Creates Legends.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

INTRODUCTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fender BXR 200 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info