Bedienungsanleitung Fender Mustang I (Seite 6 von 12) (Englisch)

550707

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

MU STA NG

™

I II/ IV/ V

♫

You can also have a footswitch button assigned to

bypass the Reverb effect by adding on the 2-button

Mustang footswitch (see Six-Button Footswitching

options, below).

Tuner Mode—Press and hold the MODE button to activate

the Tuner. The screen and the footswitch both will display the

same tuner information so that you can look in either place to

tune your guitar. The footswitch will display the nearest note;

the button LEDs will indicate sharp and flat and "in tune" is

indicated when the green LED below the footswitch display

lights up.

Press any footswitch button to exit Tuner mode.

Two-Button Footswitch (0080997000)

Connect a 2-button footswitch to your Mustang amplifier

(included with the Mustang III, optional equipment for the

Mustang IV & V) to enable remote multi-function foot control.

Use the Utility menus to assign one of the following functions

to the 2-button footswitch:

• Select presets (up/down)

• Select Quick Access presets (QA1/QA2)

• Bypass effects (various combinations)

• Set TAP interval

Six-Button Footswitching options

Plug both a 4-button and a 2-button footswitch into your

Mustang amplifier to expand your remote control options.

By assigning different functions to each footswitch you can

create more than a dozen different foot control combinations.

For example, you could assign Quick Access presets to the

4-button footswitch and Up/Down presets to the 2-button

footswitch. Or you could bypass effects with the 4-button

footswitch and select presets with the 2-button footswitch.

The choice is up to you.

Utility Menus



Press the UTIL button to activate the Utility menus.

Press the UTIL button repeatedly to step through

each of the seven menus.

Quick Access #1 / #2 / #3 — Use the first three Utility menus

to choose Quick Access presets. You can then access those

presets quickly from the footswitches (see Footswitches,

above).

Two-Button Footswitch Mode — Use this menu to assign

functions to the two-button footswitch.

Memory Lock — Use the Memory Lock menu to prevent

accidental preset modifications. You will still be able to make

temporary changes to presets with Memory Lock ON, but you

won't be able to save those changes until Memory Lock is

switched OFF.

LCD Contrast — Use this menu to adjust the contrast of the

Mustang display.

About This Amp — This menu displays the Firmware version

currently running on the amplifier. Use this information to

determine if an update is available for your amplifier.

Speaker Outputs

Mustang V, only

The Mustang V head amplifier provides stereo speaker

outputs that must both be connected to a stereo speaker

cabinet such as the MustangV 412, with four 12" Celestion®

G12P Rocket 50 speakers (recommended), or two 8Ω speaker

cabinets capable of handling 75W each.

Aux / Phones Jacks

Auxiliary Input



You can use the Auxiliary jack to input audio into your

Mustang amplifier for accompaniment. Connect the

headphone output on your CD player or MP3 player to the

AUX jack using a mini-stereo cable. Use the volume control

f e n d e r . c o m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fender Mustang I Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fender Mustang I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info