Bedienungsanleitung Fender Mustang V (Seite 10 von 12) (Englisch)

550711

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Tuner Button

Your Mustang™ amplifier has a built-in Tuner mode that turns

the control panel LEDs into a chromatic guitar tuner.

To use the tuner:

1. Press and hold the TAP button for 2 seconds. The TAP and

EXIT buttons will illuminate.

2. Strike any single string on your guitar and watch the panel

LEDs. The Preset LEDs are used to indicate the note of the

string being tuned (the top LED "#" indicates if the note is

sharp).

3. Turn the tuning peg on your guitar until the fine tuning

LEDs above the MOD knob indicate the string is in tune, as

shown above.

4. Standard guitar tuning is as follows:

5. Press EXIT or TAP to exit from the Tuner.

Save Button



Your Mustang amplifier gives you the powerful

ability to save every setting on the amplifier as

part of a preset. When you select a preset, the level of each

knob, including effect selections, is instantly recalled to your

pre-programmed settings!

The SAVE button will light up red when you turn any

programmable knob on the amplifier. This indicates that you

have temporarily modified the preset. You can reset your

modifications simply by selecting a different preset and then

back again.

♫

The EXIT button will not cancel changes to the current

preset. Only by selecting a different preset using the

PRESET knob will your temporary changes be erased.

To save a preset:

1. To save a preset you must first modify an existing preset

by turning any of the programmable knobs, such as GAIN

or MOD. (once the SAVE button is illuminated, you can

proceed to step 2).

2. Press the SAVE button. The SAVE and EXIT buttons should

be flashing rapidly. You can press EXIT at this point to

cancel the save process.

3. Turn the PRESET knob to select a preset to overwrite.

You can only overwrite the red and green banks of the

amplifier type that you started from (if you started by

modifying the amber bank, you must select either the red

or green bank to overwrite).

♫

You can modify the AMBER bank of presets by using

your computer and Fender® FUSE™ software available

at www.fender.com/support.

Aux / Phones Jacks

Auxiliary Input

You can use the Auxiliary jack to input audio into your

Mustang amplifier for accompaniment. Connect the

headphone output on your CD player or MP3 player to the

AUX jack using a mini-stereo cable. Use the volume control

on your player, together with the MASTER volume knob, to

adjust the auxiliary volume level.

Phones Jack

Plug in your headphones, ear buds, or powered speakers to

enjoy the Mustang's stereo features. This jack may also be

used as a stereo recording output. The amp's internal speaker

is muted when the PHONES jack is used.

Letters next to LEDs indicate the note being tuned

3 LEDs indicate fine tuning. GREEN means "in tune"

MU STA NG

™

I / II

f e n d e r . c o m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fender Mustang V Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fender Mustang V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info