Bedienungsanleitung Fender Ultimate Chorus DSP (Seite 7 von 40) (Englisch)

443062

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

A . IEC LINE CORD CONNECTOR - The line

c o rd must be connected to a grounded AC

receptacle in accordance with the voltage

and frequency ratings as listed on the re a r

panel under I N P U T P O W E R .

B . F O O T S W I T C H J A C K - Plug-in connection

for the FOOTSWITCH (P/N 0055592000) for

remote switching between channels, a n d

ON/OFF switching of both DSP effects cir-

cuits. NOTE: For proper operation of the

FOOTSWITCH, the DRIVE SELECT* s w i t c h

and both DSP effects D E F E AT* s w i t c h e s

must all be OUT. (A speaker-grade cord is

p referable to a coax guitar cord for connect-

ing the F O O T S W I T C H . )

C . STEREO SEND - This jack provides a line-

level stereo output from the pre-amp and

both DSP effects circuits of the Ultimate

C h o r us DSP. This output can be used in

conjunction with the STEREO RETURN {D}

as a patch point for external stereo eff e c t s

devices. (See “EFFECTS LOOPS - CON-

NECTION DIAGRAMS,” page 8). This send

can also be used to feed a stereo signal to

two channels of a re c o rd i n g / s o u n d - re i n -

f o r cement mixer. To drive another Ultimate

C h o r us DSP as an “add-on” amplifier, con-

nect a shielded stereo cord from the

S T E R E O SEND jack of the “master” amplifi-

er to the S T E R E O RETURN j a c k { D } of the

“add-on” amplifier.

D . STEREO RETURN - This stereo jack inputs

signal directly to the left and right power-

amps. It automatically disconnects the pre -

amp and DSP Effects circuits when used.

This is useful when using the stereo eff e c t s

loop option detailed above, or when using a

second Ultimate Chorus DSP as an “add-on”

amplifier pre s e r ving the s t e reo signal of the

“master” Ultimate Chorus DSP amplifier.

• N O T E : The S T E R E O jacks {C & D} a re stan-

d a rd 1/4-inch Ti p - R i n g - S l e e v e types, with:

•Left channel signal on the Ti p

•Right channel signal on the Ring

E . MONO SEND - This jack provides an imped-

ance-balanced mono output signal from the

p re-amp at a point before the DSP Effects cir-

cuits. This output can be used in conjunction

with the MONO RETURN j a c k {F} as a patch

point for external mono effects devices. (See

“EFFECTS LOOPS - CONNECTION DIA-

G R A M S ,” page 8) The MONO SEND j a c k c a n

also be used to send re c o rd i n g / s o u n d - re i n-

f o rcement consoles a dry signal. Additionally

this output can be used to drive a second

Ultimate Chorus DSP as an “add-on” amplifier.

This is done by connecting a standard guitar

c o rd from the MONO SEND jack of the “mas-

ter” amplifier to the M O N O RETURN j a c k { F } o f

the “add-on” amplifier.

F. MONO RETURN - This balanced jack inputs

signal to the stereo DSP Effects circ u i t r y

which drives the stereo power-amp section.

It automatically disconnects the pre - a m p

signal when used. This is useful when using

the mono effects loop option detailed above

or when using the Ultimate Chorus DSP as

an “add-on” amplifier for a mono s i g n a l

s o u rce. The DSP Effects are active in the

“add-on” amplifier so that a true stere o

image will be generated if the DSP Eff e c t s

a re used. NOTE: In order to function pro p -

e r l y, a dummy plug or an extra guitar cord

must be inserted into INPUT 2* on the “add-

on” amplifier with its V O L U M E* c o n t ro l s

t u r ned down.

*These controls are located on the Front Panels.

ULTIMATE CHORUS DSP - REAR PANEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fender Ultimate Chorus DSP Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info