57
7. Installation of electrical devices
TRUMA-heating system Combi C4 / C6 (E)
(special accessory, model-specic)
The TFT display panel can only be used to control the
heating system’s basic functions. To use enhanced
functions (e.g. to control the automatic climate control,
heating or cooling system), the device must be opera-
ted via the manufacturer’s own separate control panel
“CP Plus” or via the Truma-iNet System (see descrip-
tion in Chap. 7.5). Green icons indicate the functions
that are operating.
If the touch panel is used to switch o the heating, the
values that have been set will remain saved. If the he-
ating is turned on again, the functions last used will
automatically be activated.
Short-term increase in the amount of hot water
Press lightly on the icon shown on the left to increase the hot water
temperature temporarily from 40°C to 60°C. Note that this will incre-
ase the amount of hot water that is used. To reduce the temperature
from 60°C to 40°C, press again on the icon .
Setting the desired room temperature
Press on the icon to navigate to the submenu shown on
the left.
Use the icons to set the temperature in steps of 1°C from
+5°C to +30°C. The value changed is conrmed by pressing on the
Back icon; this will also take you back to the Heating menu.
20 °C
The desired room temperature (in ° C), short-term increase in the
amount of hot water for taking a shower (in ° C) and the type of
operation (gas/electric) are displayed in the menu for the TRUMA
hot water heating system. The “On/O” icon is shown in green
when the heating system is in operation.
To activate / deactivate the heating system, press lightly on the
“On/O” icon .
20
Room
temperature
40°C
12:30 23,5 °C
30.05.20 18,0 °C
20 °C
40°C
Electric
