17.7 PAUSE - time shift
This function is available only when an external USB memory device is correctly connected!!!
The time shift mode allows the user to control the television broadcast by "pausing" and then
resuming it from the same point. From the moment you switch on the time shift mode, the
Ferguson receiver will constantly record the signal from the cable provider in a buffer. The buffer
is created automatically on the external USB memory device.
Pausing the television broadcast
1. Press PAUSE
2. The time elapsed bar will now be visible on the screen
3. Press the PLAY button in order to resume the television
broadcast. The Ferguson receiver continues to record the
television broadcast when viewing the previously broadcast
programme.
Keep in mind that during buffer playback, the information bar may be hidden by means of
the EXIT button. In order to restore the bar, press PAUSE/PLAY again.
Scrolling the contents of the time shift buffer (playback of an earlier television
broadcast)
1. Switch on the time shift mode by pressing PAUSE.
2. The contents of the time shift buffer can now be scrolled
through.
3. Use the Fast forward and Rewind buttons to navigate
through the time shift buffer and press PLAY in order to start
playback.
4. You can set the red marker by means of the LEFT/RIGHT
buttons and confirm with OK in order to start playback from a
selected moment.
5. Another method consists in moving by means of the /
keys. Scrolling is effected by the number of minutes defined in the DVR configuration menu.
Keep in mind that this function is available only when the buffer time exceeds the selected scroll
time.
38
