Ferm 3
TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power input 1650 W
No-load speed 8000/min
Disc diameter 180 mm
Spindle dimension M14
Weight 3.75 kg
Lpa(sound pressure) 94.6 dB(A)
Lwa(acoustic power) 107.6 dB(A)
Vibration value 0.8 m/s2
Electrical safety
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm2. When using a cable reel always unwind the reel
completely.
PACKAGE CONTENTS
The package contains:
1 angle grinder
1 side handle
1 spanner
Set carbon brushes
instruction manual
safety instructions
guarantee card
Check the machine, loose parts and accessories for trans-
port damage.
PRODUCT INFORMATION
Fig. A:
1. on/off switch
2. screw-on lid carbon brush (both sides)
3. spindle lock
4. grinding disc
5. side handle
6. lock-off button
