763247

Ferm AGM1048 - FAG-115-500 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
EN
6Ferm
Do not use the machine without the guard. •
Securely mount the guard for maximum
safety. Make sure that the user is protected
from the grinding disc as much as possible.
Make sure that the workpiece is properly •
supported or fixed.
Wear safety goggles. Wear hearing protection. •
Wear a dust mask. If necessary, use other
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
Keep bystanders away from the work area. •
Make sure that all persons in the work area
wear protective equipment. Risk of personal
injury.
Keep the mains cable away from the rotating •
grinding disc. If the mains cable touches the
rotating grinding disc, your hands or arms may
come in contact with the grinding disc.
Risk of personal injury.
Hold the machine by the insulated gripping •
surfaces where the grinding disc may contact
hidden wiring or the mains cable. If the
grinding disc contacts a ’live’ wire, the
exposed metal parts of the machine can also
become ’live’. Risk of electric shock.
Do not use the machine while carrying it at •
your side. Risk of personal injury.
Do not use the machine on workpieces •
requiring a maximum grinding depth that
exceeds the maximum grinding depth of the
grinding disc.
Do not use accessories that require liquid •
coolants. Risk of electric shock.
Do not use the machine near flammable •
materials. Risk of fire.
Do not work materials containing asbestos. •
Asbestos is considered carcinogenic.
Do not work metal with a magnesium content •
of more than 80%.
Beware that the grinding disc continues to •
rotate for a short period after switching off the
machine. Do not attempt to bring the grinding
disc to a standstill yourself.
Never put the machine down on a table or •
a workbench before it has been switched off.
Regularly clean the ventilation slots. •
Risk of electric shock.
Kickback is a sudden reaction to a pinched, bound
or twisted grinding disc, which causes the machine
to lift up and out of the workpiece towards the user.
If the grinding disc is pinched or bound tightly by
the cut, the grinding disc jams and the machine is
rapidly driven back towards the user. If the
grinding disc is twisted in the cut, the back edge of
the grinding disc can dig into the top surface of the
workpiece, which causes the grinding disc to climb
out of the cut and jump back towards the user.
Kickback is the result of incorrect use of the
machine and/or incorrect operating procedures or
conditions. Kickback can be avoided by taking
proper precautions:
Firmly hold the machine with both hands. •
Position your arms to resist kickback forces.
Position your body to either side of the
grinding disc, but not in line with the grinding
disc. Kickback can cause the grinding disc to
jump backwards. If proper precautions are
taken, kickback forces can be controlled by
the user.
Be extra careful when using the machine on •
corners, sharp edges, etc. Make sure that the
grinding disc does not become jammed.
Risk of kickback.
If the grinding disc jams or if you interrupt a cut •
for any reason, release the on/off switch and
hold the machine motionless in the material
until the grinding disc comes to a complete
standstill. Never attempt to remove the
machine from the workpiece or pull the
machine backward while the grinding disc is in
motion. Risk of kickback.
Do not use blunt or damaged grinding discs. •
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming
jammed.
Do not use toothed saw blades. Do not use •
woodcarving blades for saw chains.
Risk of personal injury.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
Do not use the machine if the mains cable or •
the mains plug is damaged.
Only use extension cables that are suitable for •
the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a
extension cable reel, always fully unroll the
cable.
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm AGM1048 - FAG-115-500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info