Bedienungsanleitung Ferm AGM1081 (Seite 6 von 124) (Alle Sprachen)

764206

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

2. SAFETY INSTRUCTIONS

In this manual and/or on the machine the

following symbols are used:

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates electrical shock hazard.

Risk of fire

Use spindle lock only in stand still mode.

Keep bystanders away

Wear ear and eye protection

Wear protective gloves

Special safety instructions

• Checkthatthemaximumspeedindicatedon

the grinding disc corresponds to the maximum

speed of the machine. The speed of the

machine must not exceed the value on the

grinding disc.

• Makesurethatthedimensionsofthegrinding

disc correspond to the specifications of the

machine.

• Makesurethatthegrindingdischasbeen

mounted and fastened properly. Do not

use reducing rings or adapters to make the

grinding disc fit properly.

• Treatandstoregrindingdiscsinconformance

with the supplier’s instructions.

• Donotusethemachineforgrinding

workpieces with a maximum thickness

exceeding the maximum grinding depth of the

grinding disc.

• Donotusegrindingdiscsfordeburring.

• Whengrindingdiscshavetobemountedon

the thread of the spindle, make sure that the

spindle has sufficient thread. Make sure that

the spindle is sufficiently protected and does

not touch the grinding surface.

• Beforeuse,inspectthegrindingdiscforany

damage. Do not use grinding discs which are

crack-ed, ripped or otherwise damaged.

• Beforeuse,letthemachinerunidlefor30

seconds. Immediately switch off the machine

in case of abnormal vibrations or occurrence

of another defect. Carefully inspect the

machine and grinding disc before switching

the machine on again.

• Makesurethatsparksdonotputpeopleinto

danger or that they contact highly flammable

substances.

• Makesurethattheworkpieceissufficiently

supported or clamped. Keep your hands away

from the surface to be cut.

• Alwayswearsafetygogglesandhearing

protection. If desired or required also use

another kind of protection like for example an

apron or helmet.

• Ensurethatmountedwheelsandpointsare

fitted in accordance with the manufacturer’s

instructions.

• Ensurethatblottersareusedwhentheyare

provided with the bonded abrasive product

and when they are required.

• Ifaguardissuppliedwiththetoolneveruse

the tool without such a guard.

• Fortoolsintendedtobefittedwiththreaded

hole wheel, ensure that the thread in the wheel

is long enough to accept the spindle length.

• Ensurethatventilationopeningsarekept

clear when working in dusty conditions. If it

should become nessesary to clear dust, first

disconnect the tool from the mains supply

(use non metallic objects) and avoid damaging

internal parts.

• Thoughpoorconditionsoftheelectrical

mains, shortly voltage drops can appear when

starting the equipment. This can influence

other equipment (eq. blinking of a lamp). If

the mains-impedance Zmax <0.348 Ohm,

such disturbances are not expected. (In case

of need, you may contact your local supply

authority for further information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm AGM1081 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info