Bedienungsanleitung Ferm AGM1088 (Seite 6 von 108) (Alle Sprachen)

762321

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

• Only use grinding discs that are recommended

by the manufacturer. Only use guards that are

specifically designed for the grinding disc.

• Only use grinding discs that are suitable for the

application. For example: do not grind with the

side of a cut-off disc.

• Do not use the machine without the guard.

Securely mount the guard for maximum safety.

Make sure that the user is protected from the

grinding disc as much as possible.

• Make sure that the workpiece is properly

supported or fixed.

• Wear safety goggles. Wear hearing protection.

Wear a dust mask. If necessary, use other

protective means, such as safety gloves,

safety shoes, etc. Risk of personal injury.

• Keep bystanders away from the work area.

Make sure that all persons in the work area

wear protective equipment. Risk of personal

injury.

• Keep the mains cable away from the rotating

grinding disc. If the mains cable touches the

rotating grinding disc, your hands or arms may

come in contact with the grinding disc.

Risk of personal injury.

• Hold the machine by the insulated gripping

surfaces where the grinding disc may

contact hidden wiring or the mains cable. If

the grinding disc contacts a ’live’ wire, the

exposed metal parts of the machine can also

become ’live’. Risk of electric shock.

• Do not use the machine while carrying it at

your side. Risk of personal injury.

• Do not use the machine on workpieces

requiring a maximum grinding depth that

exceeds the maximum grinding depth of the

grinding disc.

• Do not use accessories that require liquid

coolants. Risk of electric shock.

• Do not use the machine near flammable

materials. Risk of fire.

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Do not work metal with a magnesium content

of more than 80%.

• Beware that the grinding disc continues to

rotate for a short period after switching off the

machine. Do not attempt to bring the grinding

disc to a standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

• Regularly clean the ventilation slots.

Risk of electric shock.

Kickback is a sudden reaction to a pinched,

bound or twisted grinding disc, which causes

the machine to lift up and out of the workpiece

towards the user. If the grinding disc is pinched

or bound tightly by the cut, the grinding disc jams

and the machine is rapidly driven back towards

the user. If the grinding disc is twisted in the cut,

the back edge of the grinding disc can dig into

the top surface of the workpiece, which causes

the grinding disc to climb out of the cut and jump

back towards the user.

Kickback is the result of incorrect use of the

machine and/or incorrect operating procedures

or conditions. Kickback can be avoided by taking

proper precautions:

• Firmly hold the machine with both hands.

Position your arms to resist kickback forces.

Position your body to either side of the

grinding disc, but not in line with the grinding

disc. Kickback can cause the grinding disc

to jump backwards. If proper precautions are

taken, kickback forces can be controlled by

the user.

• Be extra careful when using the machine on

corners, sharp edges, etc. Make sure that the

grinding disc does not become jammed.

Risk of kickback.

• If the grinding disc jams or if you interrupt a

cut for any reason, release the on/off switch

and hold the machine motionless in the

material until the grinding disc comes to a

complete standstill. Never attempt to remove

the machine from the workpiece or pull the

machine backward while the grinding disc is in

motion. Risk of kickback.

• Do not use blunt or damaged grinding discs.

Unsharpened or incorrectly mounted grinding

discs produce narrow cuts, which causes

excessive friction and kickback and increases

the risk of the grinding discs becoming

jammed.

• Do not use toothed saw blades. Do not use

woodcarving blades for saw chains.

Risk of personal injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm AGM1088 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info