Bedienungsanleitung Ferm BCM1022 (Seite 8 von 24) (Englisch)

763649

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Working area

There must not be any other persons in the

operating area. Also beware of children and of

animals. The user of the unit is responsible for

any accidents caused to other persons and/or

damage to their property. Remove all cut off parts

and other objects - danger of tripping.

Working circumstance

1. Never start the engine inside a closed room

or building. Exhaust gases contain dangerous

carbon monoxide.

2. Never use the product,

a. when the ground is slippery or when you

can’t maintain a steady posture.

b. At night, at times of heavy fog, or at any

other times when your field of vision might

be limited and it would be difficult to gain a

clear view of the working area.

c. During rain storms, during lightning storms,

at times of strong or gale-force winds, or at

any other times when weather conditions

might make it unsafe to use the product.

Working plan

1. You should never use the product when under

the influence of alcohol, when suffering from

exhaustion or lack of sleep, when suffering from

drowsiness as a result of having taken cold

medicine or at any other time when a possibility

exists that your judgment might be impaired

or that you might not be able to operate the

product properly and in a safe manner.

2. When planning your work schedule, allow

plenty of time to rest. Limit the amount of

time over which the product is to be used

continuously to somewhere around 30~40

minutes per session, and take 10~20 minutes

of rest between work sessions. Also try to keep

the total amount of work performed in a single

day under 2 hours or less.

Warnings

1. If you don’t observe the working time, or

working manner (see manual), Repetitive

Stress Injury (RSI) could occur. If you feel

discomfort, redness and swelling of your

fingers or any other part of your body, see a

doctor before getting worse.

2. To avoid noise complaints, in general, operate

product between 8a.m. and 5p.m. on weekdays

and 9a.m. to 5p.m. weekends. Check and

follow the local regulations as to sound level

and hours of operations for the product.

Before starting the engine

1. The area within a perimeter of 50 feet (15m)

of the person using the product should be

considered a hazardous area into which no

one should enter. If necessary, yellow warning

rope, warning signs should be placed around

the perimeter of the area. When work is

to be performed simultaneously by two or

more persons, care should also be taken to

constantly look around or otherwise check for

the presence and locations of other people

working so as to maintain a distance between

each person sufficient to ensure safety.

2. Check the condition of working area to avoid

any accident by hitting hidden obstacles such

as stumps, stones, cans, or broken grass.

Remove any obstacle before beginning

work.

3. Inspect the entire unit for loose fasteners and fuel

leakage. Make sure that the cutting attachment

is properly installed and securely fastened.

4. Be sure the debris guard is firmly attached in

place.

5. If the cutting head is the metal blade, use the

shoulder strap. Adjust the strap for comfort

before starting the engine. The strap should be

adjusted so the left hand can comfortably hold

the handlebar grip approximately waist high.

Starting the engine

1. Keep bystanders and animals at least 50feet

(15m) away from the operating point. If you are

approached, immediately stop the engine.

2. The product is equipped with a centrifugal

clutch mechanism, so the cutting attachment

begins to rotate as soon as the engine is started

by putting the throttle into the start position.

When starting the engine, place the product

onto the ground in a flat clear area and hold it

firmly in place so as to ensure that neither the

cutting part nor the throttle come into contact

with any obstacle when the engine starts.

Never place the throttle into the high

speed position when starting the engine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BCM1022 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info