Bedienungsanleitung Ferm BGM1019 (Seite 4 von 44) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

632953

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Indicates the presence of an electrical

voltage.

Keep bystanders away.

Wear eye and ear protection.

Special safety instructions

When using the machine for the first time:

• Check te following:

• Does the voltage rating of the bench

grinder correspond to the power supply?

• Is an earthed mains power socket

available?

• Are the power cord and plug in good

condition (solid, without fraying or other

damage)?

• Avoid the use of long extension cords. The

extension cords you use must always be

earthed.

• A grinding wheel is a brittle toolpiece. The

stone is not resistant to knocks.

• Always grind on the front edge of the grinding

wheel, and never on the side of the grinding

wheel. Never fit a cracked grinding wheel.

Replace it immediately, as the high rotational

speed could cause the stone to fly apart,

causing a serious accident.

• Always wear safety glasses when grinding.

• Never grind without the cover fitted over the

grinding wheel.

• Always fit the grinding wheel cover and tool

rest tightly, and with the correct clearance.

• Never allow more than 1-1.5 mm clearance

between tool rest and grinding wheel.

• Only use the grinding wheel for the work it

was designed for (for example sharpening

tools), and NOT for heavy construction work.

• The following information must be available,

before you fit any new grinding wheel:

• Details about the manufacturer.

• Binding material.

• Dimensions.

• Permissible rotational speed.

• Never ream out the hole in a grinding wheel to

a larger diameter.

• The maximum rotational speed of the grinding

wheel should never be allowed to exceed the

maximum speed given for the wheel.

• Never use any grinding wheel that is

damaged or deformed.

• In order to be able to grind safely, the machine

must be firmly bolted to a workbench.

• The tool rest should be replaced whenever

the width of the tool rest measures less than

20 mm.

• The recommended depth of the recess in the

flange (T) is 2 mm and the diameter of the

spindle hole is 13 mm (see Fig. D).

Whenever using the machine

• Check that the switch is NOT in the ‘ON/1’

position before connecting the machine to the

power supply.

• Always keep the power cord out of the way of

the tool’s moving parts.

Immediately switch off the machine when:

• The plug or power cord is defective or damaged.

• The switch is defective.

• You smell smoke or burning insulation

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. installation

The grinder must be firmly bolted to a workbench.

The length of the fixing bolts will depend on the

thickness of the workbench. If the workbench is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1019 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info