Bedienungsanleitung Ferm BGM1021 (Seite 4 von 36) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

510119

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

4 Ferm

Wear ear and eye protection

Special safety instructions

When using the machine for the first time

• Never use the tool without the PRCD delivered

with the tool.

• Keep water clear off the electrical parts of the

tool and away from persons in the working

area.

• If the mains cable has been damaged, it must

be replaced with a special mains cable. These

can be obtained from the manufacturer or the

manufacturer’s customer service department.

The mains cable may only be replaced by the

manufacturer, the manufacturer’s customer

service department or equally qualified

persons.

• Check the following:

• Does the voltage rating of the bench grinder

correspond to the power supply?

• Is an earthed mains power socket available?

• Are the power cord and plug in good condition

(solid, without fraying or other damage)?

• Avoid the use of long extension cords. The

extension cords you use must always be

earthed.

• A grinding wheel is a brittle toolpiece. The

stone is not resistant to knocks.

Always grind on the front edge of the grinding

wheel, and never on the side of the grinding

wheel. Never fit a cracked grinding wheel.

Replace it immediately, as the high rotational

speed could cause the stone to fly apart,

causing a serious accident.

• Always wear safety glasses when grinding.

• Never grind without the cover fitted over the

grinding wheel.

• Always fit the grinding wheel cover and tool

rest tightly, and with the correct clearance.

• Never allow more than 1-1.5 mm clearance

between tool rest and grinding wheel.

• Only use the grinding wheel for the work it was

designed for (for example sharpening tools),

and NOT for heavy construction work.

The following information must be available,

before you fit any new grinding wheel:

• Details about the manufacturer.

• Binding material.

• Dimensions.

• Permissible rotational speed.

• Never ream out the hole in a grinding wheel to

a larger diameter.

• The maximum rotational speed of the grinding

wheel should never be allowed to exceed the

maximum speed given for the wheel.

• Never use any grinding wheel that is damaged

or deformed.

• In order to be able to grind safely, the machine

must be firmly bolted to a workbench.

• The tool rest should be replaced whenever the

width of the tool rest measures less than

20 mm.

• The recommended depth of the recess in the

flange (T) is 2 mm and the diameter of the

spindle hole is 13 mm (see Fig. D).

Whenever using the machine

• Check that the switch is NOT in the ‘ON/1’

position before connecting the machine to the

power supply.

• Always keep the power cord out of the way of

the tool’s moving parts.

Immediately switch off the machine whenever:

• The plug or power cord is defective or

damaged.

• The switch is defective.

• You smell smoke or burning insulation.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the

wall outlet.

Using extension cables

Only use an approved extension cable suitable for

the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm BGM1021 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info