Ferm 77
3. BRUG
Sikkerhedsinstruktioner og gældende regler skal altid overholdes.
Vælg sandpapir
Groft sandpapir (korn 50) fjerner almideligvis de fleste materialer, og fint sandpapir bruges
til efterbehandling. Hvis overfladen er ujævn, skal man begynde med groft sandpapir.
Derefter bruges mellemgroft sandpapir (korn 80) for at fjerne ridserne fra det grove
sandpapir. Til sidst bruges fint (korn 120) sandpapir til efterbehandling.
På- og afmontering af slibebånd
Fig. C1 + C2
Tag stikket ud af kontakten, før slibebåndet monteres.
• Læg maskinen på siden med båndafskærmningen nedad.
• Løsen spændearmen (4).
• Afmonter slibebåndet fra maskinen.
• Monter det nye slibebånd på maskinen, og kontroller, at pilene på slibebåndet
peger i samme retning som retningsviseren (5).
• Stram spændearmen en gang til (4).
Indstilling af slibebånd
Fig. B
Hvis slibebåndet ikke løber parallelt med yderkanten af afskærmningen, skal slibebåndet
indstilles. Indstil slibebåndet i korrekt position ved hjælp af indstillingsknappen (12). Når
indstillingsknappen drejes med uret, rykkes slibebåndet indad, og når den drejes mod uret
rykkes det udad.
Tænd og sluk
Fig. B
• Tryk på tænd-sluk-knappen for at tænde maskinen (7).
• Udløs tænd-sluk-knappen for at slukke maskinen.
Ved uafbrudt slibning benyttes låseanordningen (8):
• Tryk på tænd-sluk-knappen for at tænde maskinen.
• Tryk på låseanordningen og udløs tænd-sluk-knappen.
• Tryk på tænd-sluk-knappen igen, og udløs tænd-sluk-knappen for at slukke for
maskinen.
GB
D
NL
F
E
P
I
S
FIN
N
DK
Ferm
Mounting the dustbag
Fig. B
A complete dust bag is enclosed. Put the wire-bracket (inside the dust bag) into to the
adapter of the dust bag (when not mounted). The end of the bracket has to point upwards.
Use the dust bag to collect dust which is released during sanding.
• Put the dust bag on the dust collection opening
• Empty the dust bag regularly in order to obtain an efficient dust extraction.
The adapter of the dust bag can also be used to connect a vacuum cleaner to the
machine.
Grip
The use of the belt sander is made easier because of the two grips one on the front side
and one on the back. Through that you can hold the machine with two hands, you have a
better control of the machine and there is less risk to becoming in touch with the moving
parts. Hold the belt sander always with both hands.
Operating instructions
Make sure that the machine has reached its full speed before placing the machine on the
work piece. This will prevent an overload of the machine.
For sanding wood, place the machine approximately 15° out of the grains of the wood.
Move the belt sander continuous over the work piece.
• Do not bend the sanding belts
• Do no use the same sanding belt for sanding wood and metal
• Do not bring too much pressure to your machine, this will only delay the sanding.
4. MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on
the motor.
This machine has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
Malfunction
Should the machine fail to function correctly, a number of possible causes and the
appropriate solutions are given below:
• The electromotor gets hot • The cool ventilation slots
in the motor are stopped
up with dirt
• Clean the cool ventilation
slots
8
GB
D
NL
F
E
P
I
S
FIN
N
DK
