38 Ferm
SPARE PARTS LIST FBS-1000N
REF NR DESCRIPTION FERM NR
3 GEAR SHAFT 409214
13 SWITCH 409215
21 GEAR, BIG 409216
27 CARBON BRUSH (SET) 409217
28 COVER BRUSH HOLDER 409218
29 TILL 31 ADJUST KNOB COMPLETE 409219
36 + 38 REAR WHEEL COMPLETE 409220
37 NEEDLE BEARING 409221
51 FRONT WHEEL 409222
56 STATOR 409223
58 ROTOR 409224
64 DUSTBAG 409225
BELT SANDER
THE NUMBERS IN THE FOLLOWING TEXT
REFER TO THE DRAWINGS ON PAGE 2
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Operation
4. Maintenance
1. MACHINE DATA
TECHNICAL
SPECIFICATION
PRODUCTINFORMATION
Fig. A
The belt sander is the perfect tool to sand wood and to
grind iron, plastic or similar materials.
The belt sander must be used for the rough work, for the
normal sanding work an orbital sander must be used.
1. On/off switch
2. Front handle
3. Rear handle
4. Blocking switch
5. Dust collection opening
6 Adjusting knob
7. Sanding belt fastener
8. Front belt roller
9. Direction indicator
10. Drive belt cover
11. Dust bag
PACKAGE CONTENTS
1 Belt sander
3 Sanding belts
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply corresponds to
the voltage on the rating plate.
The machine is double insulated in accordance
with EN-50144; therefore no earth wire is
required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm2. When using a cable reel always unwind
the reel completely.
SPECIAL SAFETY PRECAUTIONS
• If you are working with the sanding machine, wear
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1000 W
No load sander paper speed | 320m/min
Sanding belt size | 100x 533 mm
Sanding pad size | 100x 135mm
Weight | 4.8kg
Lpa (Sound pressure) | 93.5dB(A)
Lwa (Sound power level) | 106.5dB(A)
Vibration value | 4.729m/s2
Ferm 3
