Bedienungsanleitung Ferm CDM1003 FDC-1200K (Seite 7 von 30) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

538655

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

• Movethedirectionreversingswitch(6)to

the centre in order to lock the appliance in

its disabled state.

Only lay down the appliance when it has

stopped running completely. Do not place it on

a dusty surface as particles of dust could get

into the mechanism.

Chargingthebattery

The included battery is delivered in non-

charged condition.

• Onlyusethebatterychargerina

temperature range between +5° to + 40º

Celsius.

• Onlyusethebatterychargerindry,

ventilated rooms.

Charging

Fig. E

• Placethebatteryholderonaflattableand

put the battery in the battery holder. Pay

attention to + and - pole markings.

• Puttheadapterplugofthenetadapterin

the connector on the side of the battery

holder.

• Putthenetadapterinthesocket.

• Theredcharginglamponthebattery

holder will illuminate indicating the battery

is being charged.

• Thechargingprocessofafullydischarged

battery will take approximately 5 hours the

first time and afterwards approximately 3

hours.

After the charging time the red light

will not switch off automatically!

Remove the battery within 5 hours

from the charger. If the battery is not

removed from the charger after the

charging period it may become

overheated.

Dischargingthebattery

Not only charging batteries is

important, discharging is of equal

importance or even greater

importance.

• Whenthebatteryischargedthecordless

drill has to be used until you start noticing

that the power of the drill is diminishing and

that the maximum rotational speed is not

reached.

• Thebatteryisalmostdischargednow.Only

now you can start charging the battery.

• Chargingthebatterywhileitisstillcharged

for say one-third of capacity, the so-called

‘memory effect’ can occur. Since during

charging only the discharged part of the

battery capacity of the battery is being

charged now, the battery can start

crystallizing in the one-third that is still

charged. This part of the battery capacity

can never be used afterwards.

• Donotdischargethebatterytothe

minimum. As soon as you notice that the

power or the maximum rotational speed is

diminishing, you have to charge the

battery. When you proceed using the drill

and the battery becomes fully discharged,

the so-called ‘switch of poles effect’ can

occur. The polarity of the battery poles will

be switched: the ‘+’will become ‘-‘ and the ‘-

‘ will become the ‘+’. Once this has

occurred the polarity will remain switched

during loading and this will damage the

battery irreparable.

When the cordless drill is not being

used over a longer period of time,

the battery has to be charged fully

first. The battery has to be stored in

charged condition.

5. SERVICE & MAINTENANCE

Make sure that the machine is not

live when carrying out maintenance

work on the motor.

The machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory

operation depends upon proper machine care

and regular cleaning.

• Sørgforatknappentilomløbsretningen(5

påfig.A)ståridenmidtersteposition,forat

undgåutilsigtetstartafmaskinen.

• Sætbatteriet(5)indimaskinenssokkel

somvistpåtegningen.Trykdetheltibund

sådetgårihak.

• Foratfjernebatterietskaldutrykke

låsekapperne(10)påbeggesiderindog

trække batteriet ud af maskinens sokkel.

4. BETJENING

Overholdaltidsikkerhedshenvisning

erne, og følg de relevante forskrifter.

Hold maskinen ordentligt fast, og tryk boret

ensartetindiemnet.Undgåatoverbelaste

maskinen. Anvend udelukkende bor som ikke

udviser synligt slid. Slidte bor har en negativ

indflydelsepåmaskinensfunktionsevne.

Indstilling af drejningsmoment

Fig. D

Maskinen har 16 forskellige indstillinger for

drejningsmoment til regulering af den kraft

hvormed skruer bliver skruet i eller ud.

• Sætindstillingsringenfordrejningsmoment

(3)idenønskedeposition.

De indstillinger af drejningsmomentet der

ertilrådighed,visespåindstillingsringen

dels med cifrene fra 1 til 8, dels med prikker

mellem cifrene som angiver

mellempositioner (dvs. i alt 16).

• Manskalhelstvælgedenlavesteposition

der giver tilstrækkelig kraft til at dreje

skruenrundt.Vælgenhøjerepositionhvis

motoren "glider i koblingen".

Anvendelse som skruetrækker.

• Sætknappenforomløbsretningen(6)i

position 'R' for at skrue skruer i.

• Sætknappenforomløbsretningen(6)i

position 'L' for at skrue skruer ud.

Boring

• Drejindstillingsringenfordrejningsmoment

(3) i boreposition.

Sørg for at knappen for

omløbsretningen (6) altid står i

position 'R' når du borer.

Start og stop

Fig. A

• Trykpåstartknappen(1).Dukanregulere

maskinens omdrejningstal ved at trykke

mereellermindrehårdtpåknappen.

• Nårduslipperstartknappen(1),bliver

patronen straks bremset, og der er ikke

nogetefterløb.

• Nårmaskinenerslukket,kandublokere

denvedatsætteknappenforomløbs-

retningen (6) i den midterste position.

Læg først maskinen fra dig når

motoren står helt stille. Læg ikke

maskinen på et støvet underlag. Der

kan trænge støv ind i mekanismen.

Opladning af batterier

Det vedlagte batteri er ikke opladet ved

leveringen.

• Brugkunbatteriopladerenved

temperaturer mellem +5º og + 40º Celsius.

• Brugkunbatteriopladerenitørre,udluftede

lokaler.

Opladning

Fig. E

• Sætbatteriholderenpåetplantbordog

sæt batteriet i batteriholderen. Vær op-

mærksompåmarkeringerneaf+og–pol.

• Sætnetadapterensadapterstikistikketpå

siden af batteriholderen.

• Sætnetadapterenistikkontakten.

• Denrødeopladningslampepå

batteriholderen lyser for at vise, at batteriet

er ved at blive opladet.

• Opladningenafetheltafladetbatteritager

cirka5timerførstegangogdereftercirka3

timer.

Det røde lys slukkes ikke auto-

matisk, når opladningstiden er forbi!

Tag batteriet ud af opladeren inden 5

timer. Hvis batteriet ikke tages ud af

opladeren efter opladningstiden, kan

det blive overophedet.

Ferm Ferm

Ferm CDM1003 FDC-1200K Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info