Ferm 09
Only lay down the appliance when it has stopped running completely. Do not place it on a
dusty surface as particles of dust could get into the mechanism.
Charing the battery
Fig. E
The included battery is delivered in non-charged condition.
• Only use the battery charger in a temperature range between +5º to + 40º Celsius.
• Only use the battery charger in dry, ventilated rooms.
Charging
• Place the battery holder on a flat table and put the battery in the battery holder. Pay
attention to + and - pole markings.
• Put the adapter plug of the net adapter in the connector on the side of the battery holder.
• Put the net adapter in the socket.
• The red charging lamp on the battery holder will illuminate indicating the battery is being
charged.
• The charging process of a fully discharged battery will take approximately 5 hours the first
time and afterwards approximately 3 hours.
After the charging time the red light will not switch off automatically! Remove the
battery within 5 hours from the charger. If the battery is not removed from the
charger after the charging period it may become overheated.
Discharging the battery
Not only charging batteries is important, discharging is of equal importance or
even greater importance.
• When the battery is charged the cordless drill has to be used until you start noticing that
the power of the drill is diminishing and that the maximum rotational speed is not reached.
• The battery is almost discharged now. Only now you can start charging the battery.
• Charging the battery while it is still charged for say one-third of capacity, the so-called
‘memory effect’ can occur. Since during charging only the discharged part of the battery
capacity of the battery is being charged now, the battery can start crystallizing in the one-
third that is still charged. This part of the battery capacity can never be used afterwards.
• Do not discharge the battery to the minimum. As soon as you notice that the power or the
maximum rotational speed is diminishing, you have to charge the battery. When you
proceed using the drill and the battery becomes fully discharged, the so-called ‘switch of
poles effect’ can occur. The polarity of the battery poles will be switched: the ‘+’will
become ‘-‘ and the ‘-‘ will become the ‘+’. Once this has occurred the polarity will remain
switched during loading and this will damage the battery irreparable.
When the cordless drill is not being used over a longer period of time, the battery
has to be charged fully first. The battery has to be stored in charged condition.
GB
D
NL
F
E
P
I
S
SF
N
DK
88 Ferm
Hold maskinen ordentligt fast, og tryk boret ensartet ind i emnet. Undgå at overbelaste
maskinen. Anvend udelukkende bor som ikke udviser synligt slid. Slidte bor har en negativ
indflydelse på maskinens funktionsevne.
Indstilling af drejningsmoment
Fig. D
Maskinen har 16 forskellige indstillinger for drejningsmoment til regulering af den kraft
hvormed skruer bliver skruet i eller ud.
•S
æt indstillingsringen for drejningsmoment (3) i den ønskede position.
De indstillinger af drejningsmomentet der er til rådighed, vises på indstillingsringen dels med
cifrene fra 1 til 8, dels med prikker mellem cifrene som angiver mellempositioner (dvs. i alt 16).
• Man skal helst vælge den laveste position der giver tilstrækkelig kraft til at dreje skruen
rundt. Vælg en højere position hvis motoren "glider i koblingen".
Anvendelse som skruetrækker
• Sæt knappen for omløbsretningen (6) i position 'R' for at skrue skruer i.
• Sæt knappen for omløbsretningen (6) i position 'L' for at skrue skruer ud.
Boring
• Drej indstillingsringen for drejningsmoment (3) i boreposition.
Sørg for at knappen for omløbsretningen (6) altid står i position 'R' når du borer.
Start og stop
Fig. A
• Tryk på startknappen (1). Du kan regulere maskinens omdrejningstal ved at trykke mere
eller mindre hårdt på knappen.
•
Når du slipper startknappen (1), bliver patronen straks bremset, og der er ikke noget efterløb.
• Når maskinen er slukket, kan du blokere den ved at sætte knappen for omløbsretningen
(6) i den midterste position.Læg først maskinen fra dig når motoren står helt stille. Læg
ikke maskinen på et støvet underlag. Der kan trænge støv ind i mekanismen.
Opladning af batteriet
Fig. E
Det vedlagte batteri er ikke opladet ved leveringen.
• Brug kun batteriopladeren ved temperaturer mellem +5º og + 40º Celsius.
• Brug kun batteriopladeren i tørre, udluftede lokaler.
Opladning
• Sæt batteriholderen på et plant bord og sæt batteriet i batteriholderen. Vær opmærksom
på markeringerne af + og – pol.
• Sæt netadapterens adapterstik i stikket på siden af batteriholderen.
• Sæt netadapteren i stikkontakten.
•
Den røde opladningslampe på batteriholderen lyser for at vise, at batteriet er ved at blive opladet.
UK
D
NL
F
E
P
I
S
SF
N
DK
