Bedienungsanleitung Ferm CDM1105 (Seite 5 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

539073

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

The number of revolutions of the

machine can be electronically set.

Do not use in rain.

Indoor use only.

Maximum temperature 40 °C.

Do not throw the battery into fire.

Do not throw the battery into water.

Thermic protection 130 °C.

In case of failure, the transformer in not

dangerous (separated circuit).

Ni-Cad batteries can be recycled. Drop

them off at a disposal center for

chemical wastes, so that they can be

recycled or disposed of in an eco-

friendly manner.

Always recycle batteries

,PSRUWDQWVDIHW\QRWHVRQFKDUJHUDQGEDWWHU\

block

If you come in contact with acid from the

battery block, rinse it off with water

immediately. If acid gets into your eyes,

rinse out your eyes at once with water

and contact a doctor immediately!

1. Read and note the operating instructions and

safety notes for the charger and battery block

before use!

2. NB! Only use the charger and battery block

that were supplied by the manufacturer -

otherwise you will risk an accident.

3. Protect the charger, battery block and power

tool from moisture, e.g. rain or snow.

4. Always check that all cables are connected

correctly before using the charger.

5. If you discover that a cable is damaged, you

should not use the charger again. Have the

damaged cable replaced immediately.

6. When the charger is not in use, the mains

plug should be removed from the power

socket. Do not pull out the plug by grasping

the cable.

7. If the charger has been dropped or has

otherwise been exposed to high mechanical

stresses, you should have it checked for

damage by an authorised dealer before using

it again. Damaged parts should be repaired.

8. Exercise caution when handling the battery

block and do not drop it or expose it to impacts.

9. Never attempt to repair the charger or battery

block yourself. Repairs must always be

carried out by an authorised dealer -

otherwise you risk an accident.

10. Before cleaning or servicing the charger or

battery block, always pull the plug from the

charger socket.

11. Never charge the battery block when the

ambient temperature is below 5 °C or above

40°C.

12. The air vents in the charger must never be

blocked.

13. The battery block must not be short-circuited.

A short-circuit will cause a high current

to flow. This may result in overheating,

the danger of fire or explosion of the

battery block. This may damage the

battery block or the user may risk an

accident.

Therefore:

 Do not connect any cables to the poles of

the battery block.

 Take care that there are no metal objects

(nails, paper clips, coins, etc.) on the

contact surface of the battery block.

 Do not expose the battery block to water

or rain.

 Only use the battery block supplied in

combination with this cordless drill/

screwdriver so as to avoid faults and/or

risks to persons.

14. A damaged battery block or one that can no

longer be charged must be disposed of as

special waste. Do not discard it with

household waste.

15. Never throw the battery block onto a fire or

into water. This will risk explosion!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm CDM1105 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info