Bedienungsanleitung Ferm CDM1108S (Seite 8 von 120) (Alle Sprachen)

632673

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is

best to store the battery in charged

condition.

Fitting and removing drills or screwdriver bits

Fig. D



and screwdriver bits with a standard ¼ inch.

hexagonal shaft. To fit a screwdriver bit:

 

 



magnet.

 

it out of the bit holder again.

 

screws that are difficult to reach. Put it directly

into the machine’s bit holder.

Adjusting the direction of rotation

Fig. E

 <<’ in

order to drive screws or to use it for drilling.

 >>’ in

order to remove screws.

Switching the machine on and off

Fig. E



machine.

 

machine.

 

machine.

 

position to lock the movement of the on/off

switch. It cannot be activated in this position.

The machine is equipped with electronic

overload protection function. When the

machine gets overloaded it will shut

down automatically. When this happens,

please wait for at least 5 seconds to let

the overload protection reset itself.

Spindle lock function

Fig. F

The machine is fitted with an automatic spindle







the battery is empty) as a manual tool.

Work light (7)

Fig. A

The machine is equipped with a work light to

illuminate the work location.

 

switch is being pressed.

 

switch is released again.

User tips

When driving screws into wood, metal and other

materials:

 

screw bit is properly fitted and centered inside

the drill chuck.

 

dimensions. When unsure, always try if the bit

fits on the screw head without any free play

before using the machine.

 

it contacts the screw. A rotating bit may slip.

This could result in damage to the work piece.

 

straight line with the screw.

 

small amount of washing liquid or soap as a

lubricant to the screws thread.

 

tight screws or to firmly tighten screws.

 

to drill a hole with a depth equal to almost the

length of the screw. A pilot hole guides the

screw and prevents splintering or distortion of

the work piece.

Ferm CDM1108S Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info