Bedienungsanleitung Ferm COM1007P (Seite 6 von 96) (Alle Sprachen)

697794

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Chop saw 2300W - 355mm

COM1007P

Thank you for buying this FERM product. By

doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result in

electric shock, fire and/or serious injury. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Risk of electric shock

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Indoor use only

Class II machine - Double insulation - You

don’t need an earthed plug.

Always wear eye protection!

Wear hearing protection.

Wear safety gloves.

Risk of flying objects. Keep bystanders

away from the work area.

The product is in accordance with the

applicable safety standards in the

European directives.

Safety instructions for Chop saws -

Cutting instructions

1. Only ever use the cutting edge (never the side)

of the disc for cutting. Avoid putting sideways

pressure on the disc, and in particular, making

it jam.

2. Keep hands and body away from the disc.

Whilst cutting with the machine, do not wear

loose clothes which could get caught in it.

3. Treat the disc cutting saw with care, never

drop it, always store it in a safe, dry place.

Avoid excessive temperatures and humidity.

4. Ensure that all disc flanges and other fitted

parts are in good condition and assembled

according to instructions. Damaged or missing

parts can lead to disc damage. Always use the

flanges delivered with the machine.

5. Never work with damaged discs, as these can

be dangerous. When changing the disc, first

switch off the machine. Rotate the disc by

hand and inspect it for unevenness, twists or

shearing. If you find any of these, get the disc

removed and replace it with a new one. Also

replace the disc if it falls to the floor. It may

have become fragile even if you cannot see

any ostensible damage.

6. Before you begin cutting, do a test run, i.e.

take a step back, switch on the motor and

ensure that the disc is functioning correctly.

After changing the disc, let the saw run for

three minutes; thereafter, before doing any

routine work, let it test-run for one minute.

7. Whilst the machine is running, never try to

remove a work piece or to clamp a work piece

in. Always wait until the disk stops turning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ferm COM1007P Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info